I believe the Power SDR Ver. 2.0 + will not run an SDR1000 in 64 bit. Use an older Ver. 1.0 + KD6ET Jerry
On Fri, Jul 20, 2012 at 8:50 AM, <ke...@3950.net> wrote: > Eddie AB2VW wrote: >> >> Hi Kevin, >> >> Please let me know if you find a solution to your problem. I >> purchased my SDR1000 in 2006 and do not plan to get rid of it >> until it gets struck by lightning. Then I'll pull out my backup >> SDR1000 which is still in the box. >> >> All the best, >> >> Eddie in the Bronx AB2VW > > > > > Sounds good, but I am running out of ideas short of getting a > dedicated 32-bit computer. > > > > On 7/20/2012 10:44 AM, Craig Gagner wrote: >> >> Maybe I didn't make it clear enough, here is a link to the >> compatability matrix. >> >> http://www.flexradio.com/Support.aspx?topic=PowerSDR_Compatibility >> >> >> > 73 >> >> >> Craig W1MSG > > [...] > > > > Thanks, Craig. > > I'm stubborn, but maybe not stubborn enough to make this work. > > It does look like a previous poster here, Stig, LA4WAA, got an SDR-1000 to > work on Win 7 64-bit, though: > > > > Stig LA4WAA wrote: >> >> I installed PowerSDR 2.3.x with SDR-1000 under Windows7 64bit, >> not 32bit. It works fine. You need the parallel port of course. >> If you need to use USB-cable, then you have a problem, since >> those drivers are not supported. But I got a driver (from Chris >> HB9BDM), I made it to work, but only for 64bit. Then after some >> time my USB-cable got dead and I'm stuck with old computer and >> Win XP again. > > [...] >> >> It was on a Toshiba A300D laptop. (No parallel port, but build in >> firewire.) >> >> I installed only most drivers from Toshiba. Then soundcard, >> Edirol FA-66, with drivers from Edirol homepage. No problems. The >> challenge was the USB/parallel-adapter. This driver came from >> Chris HB9BDM. (I may give you his email address in private >> email.) This driver was the reason for that I tried this Win7 64 >> bit installation. It has to be installed following his >> description, in a manual way. > > > > > > It appears he got a custom driver and used the USB/parallel adapter and got > it to work. Looks like his solution is no immediate help to me, though, > since I don't have that (rare) adapter. > > Sigh. > > > > Thanks for the good information, > > > Kevin. > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
