Have you tried enabling the port? Shouldn't your interface config look like this:
! interface ethernet 4/9 enable ip address 192.168.0.77 255.255.255.0 ! That is necessary on our Foundry gear; maybe this is different? Thanks, jp On Fri, Feb 20, 2009 at 12:23 PM, Chuck Ufarley <[email protected]> wrote: > Thanks. Looping a copper cable doesn't bring the port up, and the FESX is > forwarding (see the following--ServerIron is connected via copper to the gig > link, port 26): > > FES2402 Switch#sho int bri > > Port Link State Dupl Speed Trunk Tag Priori MAC Name > 1 Down None None None None No level0 000c.db1d.4750 > 2 Down None None None None No level0 000c.db1d.4751 > 3 Down None None None None No level0 000c.db1d.4752 > 4 Down None None None None No level0 000c.db1d.4753 > 5 Down None None None None No level0 000c.db1d.4754 > 6 Down None None None None No level0 000c.db1d.4755 > 7 Down None None None None No level0 000c.db1d.4756 > 8 Down None None None None No level0 000c.db1d.4757 > 9 Down None None None None No level0 000c.db1d.4758 > 10 Down None None None None No level0 000c.db1d.4759 > 11 Down None None None None No level0 000c.db1d.475a > 12 Down None None None None No level0 000c.db1d.475b > 13 Down None None None None No level0 000c.db1d.475c > 14 Down None None None None No level0 000c.db1d.475d > 15 Down None None None None No level0 000c.db1d.475e > 16 Down None None None None No level0 000c.db1d.475f > 17 Down None None None None No level0 000c.db1d.4760 > 18 Down None None None None No level0 000c.db1d.4761 > 19 Down None None None None No level0 000c.db1d.4762 > 20 Down None None None None No level0 000c.db1d.4763 > 21 Down None None None None No level0 000c.db1d.4764 > 22 Down None None None None No level0 000c.db1d.4765 > 23 Up Forward Full 100M None No level0 000c.db1d.4766 > 24 Up Forward Full 100M None No level0 000c.db1d.4767 > 25 Up Forward Full 1G None No level0 000c.db1d.4768 > 26 Up Forward Full 1G None No level0 000c.db1d.4769 > FES2402 Switch# > > ServerIronGT E-1#sho int bri > > Port Link State Dupl Speed Trunk Tag Priori MAC Name > 4/1 Down None None None None No level0 000c.dbb5.b660 > 4/2 Down None None None None No level0 000c.dbb5.b661 > 4/3 Down None None None None No level0 000c.dbb5.b662 > 4/4 Down None None None None No level0 000c.dbb5.b663 > 4/5 Down None None None None No level0 000c.dbb5.b664 > 4/6 Down None None None None No level0 000c.dbb5.b665 > 4/7 Down None None None None No level0 000c.dbb5.b666 > 4/8 Down None None None None No level0 000c.dbb5.b667 > 4/9 Down None None None None No level0 000c.dbb5.b668 > 4/10 Down None None None None No level0 000c.dbb5.b669 > 4/11 Down None None None None No level0 000c.dbb5.b66a > 4/12 Down None None None None No level0 000c.dbb5.b66b > 4/13 Down None None None None No level0 000c.dbb5.b66c > 4/14 Down None None None None No level0 000c.dbb5.b66d > 4/15 Down None None None None No level0 000c.dbb5.b66e > 4/16 Down None None None None No level0 000c.dbb5.b66f > ServerIronGT E-1# > > Thanks again > > On Fri, Feb 20, 2009 at 10:10 AM, Seth Fiermonti <[email protected]> > wrote: >> >> From your output, you are not getting link. Be default, all of he ports >> will be in a blocking state. Look at this line: >> >> ServerIronGT E-1#sho int e 4/9 >> GigabitEthernet4/9 is down, line protocol is down >> >> Loop back a copper cable on the J-B16GC...does line protocol go UP? Also, >> send over an output of show interface brief for BOTH the SI and FESX. >> >> Thanks >> >> >> On 2/20/09 12:51 PM, "Chuck Ufarley" <[email protected]> wrote: >> >> This might be a silly question, but I can't get a port to come up on a >> ServerIron. I enabled the interface and connected it properly to a >> FES-X2402 switch, but the J-B16GC and the J-B2Gx ports just won't come up >> and forward. The cards have worked in other configs, but I can't get >> anything to come out of "blocking" mode. Here are the shows (any help >> greatly appreciated): >> >> ServerIronGT E-1#sho run >> !Building configuration... >> !Current configuration : 378 bytes >> ! >> ver 11.0.00TD4 >> ! >> module 1 bi-0-port-wsm6-management-module >> module 3 bi-jc-2-port-gig-module >> module 4 bi-jc-16-port-gig-copper-module >> ! >> context default >> ! >> aaa authentication web-server default local >> no enable aaa console >> telnet server >> username admin password ..... >> snmp-server >> ! >> interface ethernet 4/9 >> ip address 192.168.0.77 255.255.255.0 >> ! >> end >> >> ServerIronGT E-1#sho run >> !Building configuration... >> !Current configuration : 378 bytes >> ! >> ver 11.0.00TD4 >> ! >> module 1 bi-0-port-wsm6-management-module >> module 3 bi-jc-2-port-gig-module >> module 4 bi-jc-16-port-gig-copper-module >> ! >> context default >> ! >> aaa authentication web-server default local >> no enable aaa console >> telnet server >> username admin password ..... >> snmp-server >> ! >> interface ethernet 4/9 >> ip address 192.168.0.77 255.255.255.0 >> ! >> end >> >> ServerIronGT E-1#sho mod >> Module Status Ports Starting MAC >> S1: B0GMR WSM6 Management Module, SYSIF 2 M6, ACTIV 0 >> S2: >> S3: J-BxG2 JetCore Gig Fiber Module, SYSIF OK 2 000c.dbb5.b640 >> S4: J-BxGC16 JetCore Gig Copper Module, SY OK 16 000c.dbb5.b660 >> ServerIronGT E-1#sho int e 4/9 >> GigabitEthernet4/9 is down, line protocol is down >> Hardware is GigabitEthernet, address is 000c.dbb5.b668 (bia >> 000c.dbb5.b668) >> Configured speed auto, actual unknown, configured duplex fdx, actual >> unknown >> Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING >> STP configured to ON, priority is level0, flow control enabled >> mirror disabled, monitor disabled >> Not member of any active trunks >> Not member of any configured trunks >> No port name >> Internet address is 192.168.0.77/24 <http://192.168.0.77/24> , MTU 1518 >> bytes, encapsulation ethernet >> 300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization >> 300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization >> 991 packets input, 77378 bytes, 0 no buffer >> Received 581 broadcasts, 410 multicasts, 0 unicasts >> 0 input errors, 0 CRC, 0 frame, 0 ignored >> 0 runts, 0 giants, DMA received 0 packets >> 0 packets output, 0 bytes, 0 underruns >> Transmitted 0 broadcasts, 0 multicasts, 0 unicasts >> 0 output errors, 0 collisions, DMA transmitted 0 packets >> ServerIronGT E-1# >> >> +++++ >> >> Thanks much, everyone. >> >> ________________________________ >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp >> >> >> Seth R. Fiermonti >> Sr. Systems Engineer >> 7 Technology Dr >> North Chelmsford, MA >> Office: 603.397.5007 >> Mobile: 781.632.6052 >> www.brocade.com >> >> > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
