Hello Magi...
dont see what your problem is the image i just compiled on 2.4.31
works fine, i am looking at myself using a C1, labtech webcam and 2.4.31
here is some info to prove it
# cat /proc/bus/usb/drivers
usbdevfs
hub
rtl8150
serial
usb-storage
rt73
zd1211b
spca5xx
# ifconfig rausb0
rausb0 Link encap:Ethernet HWaddr 00:15:E9:BA:90:3B
inet addr:192.168.10.90 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:204 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:16458 (16.0 KiB)
# iwconfig rausb0
rausb0 RT73 WLAN ESSID:""
Mode:Ad-Hoc Frequency=1 MHz Cell: BA:C1:97:A5:B0:D0
Bit Rate=11 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=0/100 Signal level:-121 dBm Noise level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# ps | grep serv
145 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070
147 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070
148 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070
151 root 704 S servfox -d /dev/video0 -s 320x240 -w 7070
157 root 576 S grep serv
# uname -a
Linux axis 2.4.31 #99 Sun Mar 25 23:55:35 CEST 2007 cris unknown
#
Quoting jlivingstonsg1 <[EMAIL PROTECTED]>:
> Hi John.
>
> Whell if it work stabile with webcam and wifi in 2.6.15
> after patch then yes please.
>
> But if the 2.6.15 is unstab with wifi and webcam
> why not patch the 2.4.31 with the wifi, but not with rt2570 but
> with chipset of Wifi (D-link C1) ??
>
>
> www.gamereality.se
>
> Regards Magi
>
>
> --- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote:
>>
>> there is a usb problem on 2.6.15 that causes the fox to hang when
> wifi
>> and webcam are operated simultaniously
>>
>> i can however patch the 2.6.15 kernel to include spca support if
> you
>> need it ?!?
>>
>> John
>>
>> Quoting xfingerfox32 <[EMAIL PROTECTED]>:
>>
>> > Hi Magi,
>> >
>> > Did you have any problem setting up Wifi (D-link B1) and SPCA5xx
>> > together for kernel 2.4?
>> > The phrozen (John) has a Wifi patch for 2.6.15 - D-Link B1 and
> C1,
>> > have you try it? Perhaps he patched SPCA5xx too (It says so).
>> > I have not try it cause it patches a lot of things, and i would
> like
>> > only SPCA5xx and USB if it necessary.
>> >
>> > http://www.acmesystems.it/articles/00140/
> phrozen_sdk_patch_beta1.tar.b
>> > z2
>> >
>> > If you know how to patch only Wifi + SPCA + USB and test it,
> please
>> > let us know.
>> >
>> > Regards,
>> > Alexander
>> >
>> > --- In [email protected], "jlivingstonsg1"
>> > <jlivingstonsg1@> wrote:
>> >>
>> >>
>> >> Hi.
>> >>
>> >> I would really totally love to get that to.
>> >>
>> >> A fimage like "fimage_716_v100" from
>> >> http://mxhaard.free.fr/spca50x/embedded/AcmeFox/
> Foxboard_fimage716-
>> >> LE08/
>> >> for kernel 2.6.15 with wifi would be even greater. :)
>> >>
>> >>
>> >> Regards Magi
>> >>
>> >>
>> >>
>> >> --- In [email protected], "xfingerfox32" <xfinger@>
> wrote:
>> >> >
>> >> > Hello,
>> >> >
>> >> > Is there a SPCA5xxLE patch for the standard kernel 2.6.15?
>> >> >
>> >> > thanks
>> >> > Alexander
>> >> >
>> >>
>> >
>> >
>> >
>>
>
>
>
