i will hopefully later, i am kinda busy at the moment and need to work late today.
Quoting jlivingstonsg1 <[EMAIL PROTECTED]>: > Hi John. > > Please let me try your fimage. > > Can you mail it to me? > > Magi > > > --- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote: >> >> dear marge, >> >> sure, will do that soon as i get home tonight :-) >> >> regards, >> John >> Quoting jlivingstonsg1 <[EMAIL PROTECTED]>: >> >> > Hi John. >> > >> > If you get time over please put the fimage in "Files" here in the >> > Yahoo Foxboard groupe. >> > >> > I would like to be sure to get one that works because I think I > have >> > tried to flash my Foxboard with that 2.4.31 and webcam and wifi. >> > I probably do something wrong and need a working fimage. >> > >> > >> > Regards Magi >> > >> > >> > --- In [email protected], John Crispin <john@> wrote: >> >> >> >> Hello Magi... >> >> >> >> dont see what your problem is the image i just compiled on 2.4.31 >> >> works fine, i am looking at myself using a C1, labtech webcam and >> > 2.4.31 >> >> here is some info to prove it >> >> >> >> # cat /proc/bus/usb/drivers >> >> usbdevfs >> >> hub >> >> rtl8150 >> >> serial >> >> usb-storage >> >> rt73 >> >> zd1211b >> >> spca5xx >> >> # ifconfig rausb0 >> >> rausb0 Link encap:Ethernet HWaddr 00:15:E9:BA:90:3B >> >> inet addr:192.168.10.90 Bcast:192.168.10.255 >> > Mask:255.255.255.0 >> >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> >> TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 >> >> collisions:0 txqueuelen:1000 >> >> RX bytes:0 (0.0 B) TX bytes:16458 (16.0 KiB) >> >> >> >> # iwconfig rausb0 >> >> rausb0 RT73 WLAN ESSID:"" >> >> Mode:Ad-Hoc Frequency=1 MHz Cell: BA:C1:97:A5:B0:D0 >> >> Bit Rate=11 Mb/s >> >> RTS thr:off Fragment thr:off >> >> Encryption key:off >> >> Link Quality=0/100 Signal level:-121 dBm Noise > level:- >> > 115 dBm >> >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid > frag:0 >> >> Tx excessive retries:0 Invalid misc:0 Missed > beacon:0 >> >> >> >> # ps | grep serv >> >> 145 root 704 S servfox -d /dev/video0 -s 320x240 -w >> > 7070 >> >> 147 root 704 S servfox -d /dev/video0 -s 320x240 -w >> > 7070 >> >> 148 root 704 S servfox -d /dev/video0 -s 320x240 -w >> > 7070 >> >> 151 root 704 S servfox -d /dev/video0 -s 320x240 -w >> > 7070 >> >> 157 root 576 S grep serv >> >> # uname -a >> >> Linux axis 2.4.31 #99 Sun Mar 25 23:55:35 CEST 2007 cris unknown >> >> # >> >> >> >> Quoting jlivingstonsg1 <jlivingstonsg1@>: >> >> >> >> > Hi John. >> >> > >> >> > Whell if it work stabile with webcam and wifi in 2.6.15 >> >> > after patch then yes please. >> >> > >> >> > But if the 2.6.15 is unstab with wifi and webcam >> >> > why not patch the 2.4.31 with the wifi, but not with rt2570 but >> >> > with chipset of Wifi (D-link C1) ?? >> >> > >> >> > >> >> > www.gamereality.se >> >> > >> >> > Regards Magi >> >> > >> >> > >> >> > --- In [email protected], John Crispin <john@> wrote: >> >> >> >> >> >> there is a usb problem on 2.6.15 that causes the fox to hang >> > when >> >> > wifi >> >> >> and webcam are operated simultaniously >> >> >> >> >> >> i can however patch the 2.6.15 kernel to include spca support > if >> >> > you >> >> >> need it ?!? >> >> >> >> >> >> John >> >> >> >> >> >> Quoting xfingerfox32 <xfinger@>: >> >> >> >> >> >> > Hi Magi, >> >> >> > >> >> >> > Did you have any problem setting up Wifi (D-link B1) and >> > SPCA5xx >> >> >> > together for kernel 2.4? >> >> >> > The phrozen (John) has a Wifi patch for 2.6.15 - D-Link B1 > and >> >> > C1, >> >> >> > have you try it? Perhaps he patched SPCA5xx too (It says > so). >> >> >> > I have not try it cause it patches a lot of things, and i >> > would >> >> > like >> >> >> > only SPCA5xx and USB if it necessary. >> >> >> > >> >> >> > http://www.acmesystems.it/articles/00140/ >> >> > phrozen_sdk_patch_beta1.tar.b >> >> >> > z2 >> >> >> > >> >> >> > If you know how to patch only Wifi + SPCA + USB and test it, >> >> > please >> >> >> > let us know. >> >> >> > >> >> >> > Regards, >> >> >> > Alexander >> >> >> > >> >> >> > --- In [email protected], "jlivingstonsg1" >> >> >> > <jlivingstonsg1@> wrote: >> >> >> >> >> >> >> >> >> >> >> >> Hi. >> >> >> >> >> >> >> >> I would really totally love to get that to. >> >> >> >> >> >> >> >> A fimage like "fimage_716_v100" from >> >> >> >> http://mxhaard.free.fr/spca50x/embedded/AcmeFox/ >> >> > Foxboard_fimage716- >> >> >> >> LE08/ >> >> >> >> for kernel 2.6.15 with wifi would be even greater. :) >> >> >> >> >> >> >> >> >> >> >> >> Regards Magi >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> --- In [email protected], "xfingerfox32" <xfinger@> >> >> > wrote: >> >> >> >> > >> >> >> >> > Hello, >> >> >> >> > >> >> >> >> > Is there a SPCA5xxLE patch for the standard kernel > 2.6.15? >> >> >> >> > >> >> >> >> > thanks >> >> >> >> > Alexander >> >> >> >> > >> >> >> >> >> >> >> > >> >> >> > >> >> >> > >> >> >> >> >> > >> >> > >> >> > >> >> >> > >> > >> > >> > > >
