Hi John. Please do not forget to put the fimage in files here or why not mail it to me?
Regards Magi --- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote: > > dear marge, > > sure, will do that soon as i get home tonight :-) > > regards, > John > Quoting jlivingstonsg1 <[EMAIL PROTECTED]>: > > > Hi John. > > > > If you get time over please put the fimage in "Files" here in the > > Yahoo Foxboard groupe. > > > > I would like to be sure to get one that works because I think I have > > tried to flash my Foxboard with that 2.4.31 and webcam and wifi. > > I probably do something wrong and need a working fimage. > > > > > > Regards Magi > > > > > > --- In [email protected], John Crispin <john@> wrote: > >> > >> Hello Magi... > >> > >> dont see what your problem is the image i just compiled on 2.4.31 > >> works fine, i am looking at myself using a C1, labtech webcam and > > 2.4.31 > >> here is some info to prove it > >> > >> # cat /proc/bus/usb/drivers > >> usbdevfs > >> hub > >> rtl8150 > >> serial > >> usb-storage > >> rt73 > >> zd1211b > >> spca5xx > >> # ifconfig rausb0 > >> rausb0 Link encap:Ethernet HWaddr 00:15:E9:BA:90:3B > >> inet addr:192.168.10.90 Bcast:192.168.10.255 > > Mask:255.255.255.0 > >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > >> TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 > >> collisions:0 txqueuelen:1000 > >> RX bytes:0 (0.0 B) TX bytes:16458 (16.0 KiB) > >> > >> # iwconfig rausb0 > >> rausb0 RT73 WLAN ESSID:"" > >> Mode:Ad-Hoc Frequency=1 MHz Cell: BA:C1:97:A5:B0:D0 > >> Bit Rate=11 Mb/s > >> RTS thr:off Fragment thr:off > >> Encryption key:off > >> Link Quality=0/100 Signal level:-121 dBm Noise level:- > > 115 dBm > >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >> > >> # ps | grep serv > >> 145 root 704 S servfox -d /dev/video0 -s 320x240 -w > > 7070 > >> 147 root 704 S servfox -d /dev/video0 -s 320x240 -w > > 7070 > >> 148 root 704 S servfox -d /dev/video0 -s 320x240 -w > > 7070 > >> 151 root 704 S servfox -d /dev/video0 -s 320x240 -w > > 7070 > >> 157 root 576 S grep serv > >> # uname -a > >> Linux axis 2.4.31 #99 Sun Mar 25 23:55:35 CEST 2007 cris unknown > >> # > >> > >> Quoting jlivingstonsg1 <jlivingstonsg1@>: > >> > >> > Hi John. > >> > > >> > Whell if it work stabile with webcam and wifi in 2.6.15 > >> > after patch then yes please. > >> > > >> > But if the 2.6.15 is unstab with wifi and webcam > >> > why not patch the 2.4.31 with the wifi, but not with rt2570 but > >> > with chipset of Wifi (D-link C1) ?? > >> > > >> > > >> > www.gamereality.se > >> > > >> > Regards Magi > >> > > >> > > >> > --- In [email protected], John Crispin <john@> wrote: > >> >> > >> >> there is a usb problem on 2.6.15 that causes the fox to hang > > when > >> > wifi > >> >> and webcam are operated simultaniously > >> >> > >> >> i can however patch the 2.6.15 kernel to include spca support if > >> > you > >> >> need it ?!? > >> >> > >> >> John > >> >> > >> >> Quoting xfingerfox32 <xfinger@>: > >> >> > >> >> > Hi Magi, > >> >> > > >> >> > Did you have any problem setting up Wifi (D-link B1) and > > SPCA5xx > >> >> > together for kernel 2.4? > >> >> > The phrozen (John) has a Wifi patch for 2.6.15 - D-Link B1 and > >> > C1, > >> >> > have you try it? Perhaps he patched SPCA5xx too (It says so). > >> >> > I have not try it cause it patches a lot of things, and i > > would > >> > like > >> >> > only SPCA5xx and USB if it necessary. > >> >> > > >> >> > http://www.acmesystems.it/articles/00140/ > >> > phrozen_sdk_patch_beta1.tar.b > >> >> > z2 > >> >> > > >> >> > If you know how to patch only Wifi + SPCA + USB and test it, > >> > please > >> >> > let us know. > >> >> > > >> >> > Regards, > >> >> > Alexander > >> >> > > >> >> > --- In [email protected], "jlivingstonsg1" > >> >> > <jlivingstonsg1@> wrote: > >> >> >> > >> >> >> > >> >> >> Hi. > >> >> >> > >> >> >> I would really totally love to get that to. > >> >> >> > >> >> >> A fimage like "fimage_716_v100" from > >> >> >> http://mxhaard.free.fr/spca50x/embedded/AcmeFox/ > >> > Foxboard_fimage716- > >> >> >> LE08/ > >> >> >> for kernel 2.6.15 with wifi would be even greater. :) > >> >> >> > >> >> >> > >> >> >> Regards Magi > >> >> >> > >> >> >> > >> >> >> > >> >> >> --- In [email protected], "xfingerfox32" <xfinger@> > >> > wrote: > >> >> >> > > >> >> >> > Hello, > >> >> >> > > >> >> >> > Is there a SPCA5xxLE patch for the standard kernel 2.6.15? > >> >> >> > > >> >> >> > thanks > >> >> >> > Alexander > >> >> >> > > >> >> >> > >> >> > > >> >> > > >> >> > > >> >> > >> > > >> > > >> > > >> > > > > > > >
