Hi John.

Please let me try your fimage.

Can you mail it to me?

Magi 


--- In [email protected], John Crispin <[EMAIL PROTECTED]> wrote:
>
> dear marge,
> 
> sure, will do that soon as i get home tonight :-)
> 
> regards,
> John
> Quoting jlivingstonsg1 <[EMAIL PROTECTED]>:
> 
> > Hi John.
> >
> > If you get time over please put the fimage in "Files" here in the
> > Yahoo Foxboard groupe.
> >
> > I would like to be sure to get one that works because I think I 
have
> > tried to flash my Foxboard with that 2.4.31 and webcam and wifi.
> > I probably do something wrong and need a working fimage.
> >
> >
> > Regards Magi
> >
> >
> > --- In [email protected], John Crispin <john@> wrote:
> >>
> >> Hello Magi...
> >>
> >> dont see what your problem is the image i just compiled on 2.4.31
> >> works fine, i am looking at myself using a C1, labtech webcam and
> > 2.4.31
> >> here is some info to prove it
> >>
> >> # cat /proc/bus/usb/drivers
> >>           usbdevfs
> >>           hub
> >>           rtl8150
> >>           serial
> >>           usb-storage
> >>           rt73
> >>           zd1211b
> >>           spca5xx
> >> # ifconfig rausb0
> >> rausb0    Link encap:Ethernet  HWaddr 00:15:E9:BA:90:3B
> >>            inet addr:192.168.10.90  Bcast:192.168.10.255
> > Mask:255.255.255.0
> >>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:204 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 txqueuelen:1000
> >>            RX bytes:0 (0.0 B)  TX bytes:16458 (16.0 KiB)
> >>
> >> # iwconfig rausb0
> >> rausb0    RT73 WLAN  ESSID:""
> >>            Mode:Ad-Hoc  Frequency=1 MHz  Cell: BA:C1:97:A5:B0:D0
> >>            Bit Rate=11 Mb/s
> >>            RTS thr:off   Fragment thr:off
> >>            Encryption key:off
> >>            Link Quality=0/100  Signal level:-121 dBm  Noise 
level:-
> > 115 dBm
> >>            Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid 
frag:0
> >>            Tx excessive retries:0  Invalid misc:0   Missed 
beacon:0
> >>
> >> # ps | grep serv
> >>    145 root        704 S   servfox -d /dev/video0 -s 320x240 -w
> > 7070
> >>    147 root        704 S   servfox -d /dev/video0 -s 320x240 -w
> > 7070
> >>    148 root        704 S   servfox -d /dev/video0 -s 320x240 -w
> > 7070
> >>    151 root        704 S   servfox -d /dev/video0 -s 320x240 -w
> > 7070
> >>    157 root        576 S   grep serv
> >> # uname -a
> >> Linux axis 2.4.31 #99 Sun Mar 25 23:55:35 CEST 2007 cris unknown
> >> #
> >>
> >> Quoting jlivingstonsg1 <jlivingstonsg1@>:
> >>
> >> > Hi John.
> >> >
> >> > Whell if it work stabile with webcam and wifi in 2.6.15
> >> > after patch then yes please.
> >> >
> >> > But if the 2.6.15 is unstab with wifi and webcam
> >> > why not patch the 2.4.31 with the wifi, but not with rt2570 but
> >> > with chipset of Wifi (D-link C1) ??
> >> >
> >> >
> >> > www.gamereality.se
> >> >
> >> > Regards Magi
> >> >
> >> >
> >> > --- In [email protected], John Crispin <john@> wrote:
> >> >>
> >> >> there is a usb problem on 2.6.15 that causes the fox to hang
> > when
> >> > wifi
> >> >> and webcam are operated simultaniously
> >> >>
> >> >> i can however patch the 2.6.15 kernel to include spca support 
if
> >> > you
> >> >> need it ?!?
> >> >>
> >> >> John
> >> >>
> >> >> Quoting xfingerfox32 <xfinger@>:
> >> >>
> >> >> > Hi Magi,
> >> >> >
> >> >> > Did you have any problem setting up Wifi (D-link B1) and
> > SPCA5xx
> >> >> > together for kernel 2.4?
> >> >> > The phrozen (John) has a Wifi patch for 2.6.15 - D-Link B1 
and
> >> > C1,
> >> >> > have you try it? Perhaps he patched SPCA5xx too (It says 
so).
> >> >> > I have not try it cause it patches a lot of things, and i
> > would
> >> > like
> >> >> > only SPCA5xx and USB if it necessary.
> >> >> >
> >> >> > http://www.acmesystems.it/articles/00140/
> >> > phrozen_sdk_patch_beta1.tar.b
> >> >> > z2
> >> >> >
> >> >> > If you know how to patch only Wifi + SPCA + USB and test it,
> >> > please
> >> >> > let us know.
> >> >> >
> >> >> > Regards,
> >> >> > Alexander
> >> >> >
> >> >> > --- In [email protected], "jlivingstonsg1"
> >> >> > <jlivingstonsg1@> wrote:
> >> >> >>
> >> >> >>
> >> >> >> Hi.
> >> >> >>
> >> >> >> I would really totally love to get that to.
> >> >> >>
> >> >> >> A fimage like "fimage_716_v100" from
> >> >> >> http://mxhaard.free.fr/spca50x/embedded/AcmeFox/
> >> > Foxboard_fimage716-
> >> >> >> LE08/
> >> >> >> for kernel 2.6.15 with wifi would be even greater.  :)
> >> >> >>
> >> >> >>
> >> >> >> Regards Magi
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --- In [email protected], "xfingerfox32" <xfinger@>
> >> > wrote:
> >> >> >> >
> >> >> >> > Hello,
> >> >> >> >
> >> >> >> > Is there a SPCA5xxLE patch for the standard kernel 
2.6.15?
> >> >> >> >
> >> >> >> > thanks
> >> >> >> > Alexander
> >> >> >> >
> >> >> >>
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >> >
> >>
> >
> >
> >
>


Reply via email to