Hi Patrick,
We bought a AW51C a few years ago as part of a new system. It would crash
for no apparent reason and the Foxboro installation team replaced it with a
AW51B before turning the system over to us. We were later told that Foxboro
quit using the Cs altogether.
Stephen Murray
Asarco
-----Original Message-----
From: Ball, Patrick G. [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 18, 2001 10:59 AM
To: 'Foxboro DCS Mail List'
Subject: RE: Upgrading Foxboro Boxes
Robert,
I am located at the PSDF (Power System Development Facility) her in
Wilsonville, AL. back a couple of years ago, we upgraded to an AW51C from
AW51A box (Ver. 4.1). We also have OSI PI system. I thought the A box was
slow, but when we got our C box, it would run fine without PI running, but
when PI was started the C box would crash in about 45 minutes. We had to get
an AW51E box to fix the problem. We did work it out since we had just
upgraded to a C box. I know this probably does not answer your question, but
I thought I would throw this in.
Patrick G. Ball
Internet Address -- mailto:[EMAIL PROTECTED]
Intercompany -- 8-824-5877
Bell Phone -- 1-205-670-5877
Beeper -- 1-877-986-6814
<http://psdf.southernco.com/>
This transmission is for the intended addressee only and is confidential
information. If you have received this transmission in error, please delete
it and notify the sender. The contents of this E-mail are the opinion of the
writer only and are not endorsed by ASARCO Inc. unless expressly stated
otherwise.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
