Chris Ross wrote on 11/05/2019 19:34:
Hello.  I have a Cisco UCS C220-M5 with a RAID controller.  It calls itself
"Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which
looks to be an LSI MegaRAID Tri-Mode SAS3516.  It looks like this should
be supported by the mpr(4) driver, but it doesn't seem to recognize it
at boot time.  Is there some magic I need to perform for the 12.1-RELEASE
image ISO boot to get this driver loaded, or will some internal changes
be needed to support this particular part due to quirks?

Let me know any information I can provide that will help diagnose.  Thank
you.

Do you have mpr_load="YES" in loader.conf?
Or for ISO booting you can manually load kernel modules at boot prompt.

https://www.freebsd.org/cgi/man.cgi?query=loader%288%29

On a boot prompt:
   load [-t type] file ...
   boot

Miroslav Lachman
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"

Reply via email to