Chris Ross wrote on 11/05/2019 21:19:
On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote:
Chris Ross wrote on 11/05/2019 19:34:
Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself
"Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5.
Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which
looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this should
be supported by the mpr(4) driver, but it doesn't seem to recognize it
at boot time.
Do you have mpr_load="YES" in loader.conf?
Or for ISO booting you can manually load kernel modules at boot prompt.
I dropped to boot prompt in ISO boot, and entered 'mpr_load="YES"'.
I tried "load", but wasn't able to devine how to load the mpr module with
that. Is that needed, or should 'mpr_load="YES"' have accomplished the
desired result?
mpr_load="YES" goes to /etc/loader.conf
If you need to load mpr manually in boot prompt I am not sure if it
should be:
load mpr
or
load mpr.ko
of full path
load /boot/kernel/mpr.ko
Kind Regards
Miroslav Lachman
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
