On Tue, Nov 05, 2019 at 08:20:15PM +0100, Miroslav Lachman wrote: > Chris Ross wrote on 11/05/2019 19:34: > > Hello. I have a Cisco UCS C220-M5 with a RAID controller. It calls itself > > "Cisco 12G Modular Raid Controller with 2GB cache", PPID UCSC-RAID-M5. > > Looking at the CIMC, it shows the PCI vendor/device ids 1000:0014, which > > looks to be an LSI MegaRAID Tri-Mode SAS3516. It looks like this should > > be supported by the mpr(4) driver, but it doesn't seem to recognize it > > at boot time. > > Do you have mpr_load="YES" in loader.conf? > Or for ISO booting you can manually load kernel modules at boot prompt.
I dropped to boot prompt in ISO boot, and entered 'mpr_load="YES"'. I tried "load", but wasn't able to devine how to load the mpr module with that. Is that needed, or should 'mpr_load="YES"' have accomplished the desired result? - Chris _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"