Hi! 1-Фев-2004 21:38 [EMAIL PROTECTED] (Michael Devore) wrote to [EMAIL PROTECTED], [EMAIL PROTECTED]:
>> Review sources. himem64.asm contains setz instruction. This instruction >>only available for 386+, whereas himem should be loadable on 286 also. MD> Further source review would show that HIMEM is for 386 only, as the MD> check_cpu routine shows. That's been a basic requirement of HIMEM since it MD> was introduced before my time. HIMEM was firstly introduced (and used) at time of AT286 machines. There was no "requirement" for himem to work only on 386+ (unless you mean "himem" as part of tom's emm386 package, not "himem" as class of drivers). ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freedos-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freedos-devel