Re: Cisco 1100 AP and XP Client using tls (PEAP)

Bob McCormick Fri, 23 Apr 2004 15:27:20 -0700

I really do recommend trying with just a test user in the users file first. It's a good way to make sure you're not having PEAP or access point issues first before you go banging your head against the LDAP-EAP integration angle.

On Apr 23, 2004, at 4:14 PM, Clayton Dukes wrote:

Well poop...


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob
McCormick
Sent: Friday, April 23, 2004 5:10 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco 1100 AP and XP Client using tls (PEAP)

If your not getting an IP it's still not working... The only times I've had that problem it was because I wasn't actually getting authenticated. For some reason stupid XP and 2k will sometimes still say your connected. I don't know why.

On Apr 23, 2004, at 3:59 PM, Clayton Dukes wrote:

Well, I have it working, at least it appears to be, but I am still not
getting an ip on the laptop -- do I need to pass the dhcp server
somewhere?
Sorry if I don't understand this stuff as well as you do, please be
patient with me.


rad_recv: Access-Request packet from host 216.139.200.5:59452, id=49,
length=147
        User-Name = "cdukes"
        Framed-MTU = 1400
        Called-Station-Id = "000f.8f76.2e20"
        Calling-Station-Id = "0006.25a9.8594"
        Message-Authenticator = 0xf7b2bde25d17ea027b4f0b283a60cdae
        EAP-Message = 0x0202000b016364756b6573
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 378
        State = 0x92f333abdd073fa963f08d534129f7a4
        Service-Type = Framed-User
        NAS-IP-Address = 10.100.10.10
        NAS-Identifier = "ap-noc"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "preprocess" returns ok for request 4
  modcall[authorize]: module "chap" returns noop for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
    rlm_realm: No '@' in User-Name = "cdukes", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 4
  rlm_eap: EAP packet type response id 2 length 11
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
    users: Matched DEFAULT at 152
    users: Matched DEFAULT at 171
    users: Matched cdukes at 215
  modcall[authorize]: module "files" returns ok for request 4
modcall: group authorize returns updated for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4 Sending
Access-Challenge of id 49 to 216.139.200.5:59452
        Framed-IP-Address = 255.255.255.254
        Framed-MTU = 576
        Service-Type = Framed-User
        EAP-Message = 0x010300060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x45e0bb69aebe14a82b34c32a696e3a8f
Finished request 4
Going to the next request
Waking up in 6 seconds...


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Friday, April 23, 2004 4:31 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco 1100 AP and XP Client using tls (PEAP)

"Clayton Dukes" <[EMAIL PROTECTED]> wrote:

Sorry, I must have misunderstood. Forgive me...If I turn off LDAP in
the authenticate section,

Did I say to do that? No. Go back and read what I said.

  If you're retrieving passwords from the LDAP directory, then setting
Auth-Type := LDAP is not only redundant, it ensures that CHAP,
MS-CHAP, and PEAP authentication won't ever work.  In addition, it
increases the load on your LDAP server, for no point.

  If you're not retrieving passwords from LDAP, then CHAP, MS-CHAP,
and PEAP won't *ever* work.  Only PAP authentication will work.

Don't set Auth-Type := LDAP.

  Please READ my responses, and don't read into them your
interpretation of what you think I meant to say.

Alan DeKok.

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html


-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

!DSPAM:40898422269973436761932!

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Cisco 1100 AP and XP Client using tls (PEAP)

Reply via email to