Re: Cisco 1100 AP and XP Client using tls (PEAP)

Fri, 23 Apr 2004 15:41:25 -0700

If it's working you should get something like this at the end of the debugs:

modcall: group authenticate returns ok for request 8
Sending Access-Accept of id 47 to 10.140.24.12:21666
Session-Timeout := 300
MS-MPPE-Recv-Key = 0xa11d483cf9aba48bfab9540fd61d804c7237c5eda0b4dc05c54135d87943895f
MS-MPPE-Send-Key = 0xe5318527f167aed0bc874c07f301c966c58b3e93747df14a44b5f67477caaf35
EAP-Message = 0x03090004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "bobm"
Finished request 8
Going to the next request


I'm not seeing that in *your* debugs, so unless you left it out, it ain't working.
Can you post the contents of your users file?

On Apr 23, 2004, at 4:28 PM, Clayton Dukes wrote:

That's what I would have thought -- but the debugs seem to indicate that the
laptop is connecting.
Any ideas for a next step?

Here's my AP debug:

Apr 23 18:25:05 EST: RADIUS(0000028A): Using existing nas_port 384
Apr 23 18:25:05 EST: RADIUS: Pick NAS IP for uid=650 tableid=0
cfg_addr=10.100.10.10 best_addr=0.0.0.0
Apr 23 18:25:05 EST: RADIUS: Pick NAS IP for uid=650 tableid=0
cfg_addr=10.100.10.10 best_addr=0.0.0.0
Apr 23 18:25:05 EST: RADIUS(0000028A): Send Access-Request to
16.19.20.133:1812 id 21647/105, len 147
Apr 23 18:25:05 EST: RADIUS: Received from id 21647/105 16.19.20.133:1812,
Access-Challenge, len 82
Apr 23 18:25:05 EST: RADIUS/DECODE: EAP-Message fragments, 6, total 6 bytes


And here's the associated radius debug:

Cleaning up request 53 ID 105 with timestamp 408997c2
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 16.19.20.5:59475, id=106,
length=147
        User-Name = "cdukes"
        Framed-MTU = 1400
        Called-Station-Id = "000f.8f76.2e20"
        Calling-Station-Id = "0006.25a9.8594"
        Message-Authenticator = 0x9b684a21fff2d3e1a47467fd3f363ee2
        EAP-Message = 0x0211000b016364756b6573
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 384
        State = 0x7ef8020751e4e748b152c0a9060b4c2d
        Service-Type = Framed-User
        NAS-IP-Address = 10.100.10.10
        NAS-Identifier = "ap-noc"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 54
  modcall[authorize]: module "preprocess" returns ok for request 54
  modcall[authorize]: module "chap" returns noop for request 54
  modcall[authorize]: module "mschap" returns noop for request 54
    rlm_realm: No '@' in User-Name = "cdukes", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 54
  rlm_eap: EAP packet type response id 17 length 11
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 54
    users: Matched DEFAULT at 152
    users: Matched DEFAULT at 171
    users: Matched cdukes at 215
  modcall[authorize]: module "files" returns ok for request 54
modcall: group authorize returns updated for request 54
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 54
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 54
modcall: group authenticate returns handled for request 54
Sending Access-Challenge of id 106 to 26.19.20.5:59475
        Framed-IP-Address = 255.255.255.254
        Framed-MTU = 576
        Service-Type = Framed-User
        EAP-Message = 0x011200060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xa934524327fc14393c93048971b9574c
Finished request 54
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 54 ID 106 with timestamp 408997e0
Nothing to do.  Sleeping until we see a request.

#######END


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok
Sent: Friday, April 23, 2004 5:21 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco 1100 AP and XP Client using tls (PEAP)

"Clayton Dukes" <[EMAIL PROTECTED]> wrote: 
Well, I have it working, at least it appears to be, but I am still not
getting an ip on the laptop -- do I need to pass the dhcp server
somewhere?

No. The client should send a broadcast DHCP request, and the dhcp server
should pick that up.

Alan DeKok.


-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html


!DSPAM:408985c9273879057181623!




-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to