I'll take a shot at it. I recommend you use DirectFB 0.9.19. You need this is /etc/directfbrc, amend it if your on NTSC
matrox-crtc2 matrox-tv-standard=pal primary-layer=2 and this in freevo.conf display = dfbmga geometry = 720x576 tv = pal During freevo startup what is the output? Do you see messages from DirectFB On Gentoo I had to build libsdl then DirectFB then libsdl again due to circular dependencies. I didnt need to set environment variables but others have. I needed to patch mplayer with the latest dfbmga-update patch (this even applies to 0.91). But since your mplayer runs okay standalone thats probably not your problem Try to provide more detail about the steps you have followed. Mark On Mon, 25 Aug 2003 16:17:45 +0200 Kai Fricke <[EMAIL PROTECTED]> wrote: > Hi! > > I would be very pleased to get some help with my problem. I've found > alot snippets on the freevo wiki pages and links here and there, but > nothing completely focused on using freevo on dfbmga. So here comes my > story... > > I've read alot about setting up freevo the best way on my configuration. > The main problem is to get the Matrox G450 up and running correctly on > tvout. > The best way seems to be the directfb library and the directfb patches > found in the mplayer sources. They enable the system to play very nice > movies with mplayer on the tvout (which is by the way the y-cable on the > second head of the g450). And all of this without playing around with > framebuffer tweaking for proper PAL display settings (timing, > resolution, etc.). > > The final step i thought was to fetch the SDL library from CVS. I did > that and the 'ldd /../libSDL.so' tells me that she seems to use the > directfb library if told so. > > But how do i really get freevo to use the dfbmga (directfb on mga fb > combination) output? > I only found the display parameter directfb in the freevo > configurations. This way i still get the output on my first head, my > monitor, and not on the second, my tv. > When i insert the mplayer parameters for dfbmga, which give me nice > video on the tv as i would like, into the freevo configuration, my > monitor gets black when i try to play a movie, but nothing happens. the > mplayer logfiles tell nothing bad, the mention the driectfb settings and > so on, but the vt stays dark. > > I remember some SDL environment settings to control some settings of the > SDL library, but i've not found anything about this with google. Is this > the way i need to go? Or am i completly wrong? > > I'm kind of stuck with this. How can i tell the sdl to use my dfbmga > output :-( > > -- > #kai > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: VM Ware > With VMware you can run multiple operating systems on a single machine. > WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines > at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
