Yugandhar, If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml" to make things work (where xx should be your country-code).
Michel 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > Hi Michel, > Once again thanks for your reply, I have followed the steps given by > you. But I had one problem I have changed freq.py file as specified by you > and entered the channel list for India as follows: > CHANLIST = { > "nl-multikabel" : dict(PAL_MULTIKABEL), > "us-bcast" : dict(NTSC_BCAST), > "india" : dict(PAL_INIDA), > ..... > } > After this I have to make PAL_INDIA with the channels and frequency my > question I think the frequencies entered in freq.py is kilohertz am I right > I also I have convert the megahertz frequency to kilohertz and enter in the > table or else I can directly enter the megahertz frequency One more question > is have installed XML TV but still I can't able to see the TV.xml file can u > just tell me why I can't able to see the TV.xml file in my system. > > Regards, > Yugandhar. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Michel Hoogervorst > Sent: Tuesday, June 12, 2007 11:47 AM > To: Yugandhar G.V > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > Yugandhar, > > What you entered in freq.py should look something like this: > CHANLIST = { > "nl-multikabel" : dict(PAL_MULTIKABEL), > "us-bcast" : dict(NTSC_BCAST), > ..... > } > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below: > > PAL_MULTIKABEL = [ > ("10", 208000 ), # Nederland 1 > ("11", 216000 ), # Nederland 2 > ("12", 224000 ), # Nederland 3 > ] > > Where this is ("channel", frequency). > In your local_conf.py, you should match that like this: > > TV_CHANNELS = [ > ('1.tvgids.nl', 'Nederland 1', '10'), > ('2.tvgids.nl', 'Nederland 2', '11'), > ('3.tvgids.nl', 'Nederland 3', '12'), > ] > > Where this is ('xmltv_id', 'Display name', 'channel') > > The xmltv_id should match your TV.xml (made by xmltv). This is not > nessacary for TV to work, but is needed for the tv-guide only. > > Hope this is clear? > > > Michel > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > > > Hi Michel, > > I am not using the cable for the Hauppauge card I am using the > > antenna to get the channels. So, I want to scan for the channels first and > > list down all the frequencies and then I have to edit the freq.py file. If > > you any thing about this please help me. > > After editing freq.py file for my country(India) just tell me what > > are all the things to be done. Should I go directly to TV guide and it > shows > > the channels list so that if I enter on a particular channel can I able > to > > watch the tv. > > > > Regards, > > Yugandhar. > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users