For getting the freevo to work I have to fill that structure TV_CHANNELS right in that what I have to put in the place of xmltvid.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michel Hoogervorst Sent: Tuesday, June 12, 2007 7:52 PM To: Yugandhar G.V Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf I must say I have no clue... maybe someone else on this list from India could help with this? You can however still use Freevo with TV without the TV.xml, it should already work, but you just don't see any programs in the program guide. Michel 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > Hi Michel, > Tv_grab_India is not so what I have to do how can I create that . I > have to create at the time of installation or I can create after > installation too. > > Regards, > Yugandhar. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Michel Hoogervorst > Sent: Tuesday, June 12, 2007 5:35 PM > To: freevo-users@lists.sourceforge.net > Cc: Yugandhar G.V > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > Yugandhar, > > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml" > to make things work (where xx should be your country-code). > > > Michel > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > Hi Michel, > > Once again thanks for your reply, I have followed the steps given > by > > you. But I had one problem I have changed freq.py file as specified by you > > and entered the channel list for India as follows: > > CHANLIST = { > > "nl-multikabel" : dict(PAL_MULTIKABEL), > > "us-bcast" : dict(NTSC_BCAST), > > "india" : dict(PAL_INIDA), > > ..... > > } > > After this I have to make PAL_INDIA with the channels and frequency my > > question I think the frequencies entered in freq.py is kilohertz am I > right > > I also I have convert the megahertz frequency to kilohertz and enter in > the > > table or else I can directly enter the megahertz frequency One more > question > > is have installed XML TV but still I can't able to see the TV.xml file can > u > > just tell me why I can't able to see the TV.xml file in my system. > > > > Regards, > > Yugandhar. > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > > Of Michel Hoogervorst > > Sent: Tuesday, June 12, 2007 11:47 AM > > To: Yugandhar G.V > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > > > Yugandhar, > > > > What you entered in freq.py should look something like this: > > CHANLIST = { > > "nl-multikabel" : dict(PAL_MULTIKABEL), > > "us-bcast" : dict(NTSC_BCAST), > > ..... > > } > > > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below: > > > > PAL_MULTIKABEL = [ > > ("10", 208000 ), # Nederland 1 > > ("11", 216000 ), # Nederland 2 > > ("12", 224000 ), # Nederland 3 > > ] > > > > Where this is ("channel", frequency). > > In your local_conf.py, you should match that like this: > > > > TV_CHANNELS = [ > > ('1.tvgids.nl', 'Nederland 1', '10'), > > ('2.tvgids.nl', 'Nederland 2', '11'), > > ('3.tvgids.nl', 'Nederland 3', '12'), > > ] > > > > Where this is ('xmltv_id', 'Display name', 'channel') > > > > The xmltv_id should match your TV.xml (made by xmltv). This is not > > nessacary for TV to work, but is needed for the tv-guide only. > > > > Hope this is clear? > > > > > > Michel > > > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > > > > > Hi Michel, > > > I am not using the cable for the Hauppauge card I am using the > > > antenna to get the channels. So, I want to scan for the channels first > and > > > list down all the frequencies and then I have to edit the freq.py file. > If > > > you any thing about this please help me. > > > After editing freq.py file for my country(India) just tell me > what > > > are all the things to be done. Should I go directly to TV guide and it > > shows > > > the channels list so that if I enter on a particular channel can I able > > to > > > watch the tv. > > > > > > Regards, > > > Yugandhar. > > > > > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
