Hi Michel, I have followed the steps given by you and when I start the freevo and enter into watch TV it shows the TV guide and when I enter into the TV guide and enter on any channel it is showing the following error: This channel has no data loaded. The frequencies I entered are correct because I have checked with ivtv-tune application and captured the video and played using mplayer can you please tell me what exactly is happening.
Regards, Yugandhar G.V. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michel Hoogervorst Sent: Tuesday, June 12, 2007 8:05 PM To: freevo-users@lists.sourceforge.net Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf You could just fill in anything for the xmlid, this is only needed in order to make the program guide work like a program guide ;-) 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > For getting the freevo to work I have to fill that structure TV_CHANNELS > right in that what I have to put in the place of xmltvid. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Michel Hoogervorst > Sent: Tuesday, June 12, 2007 7:52 PM > To: Yugandhar G.V > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > I must say I have no clue... maybe someone else on this list from > India could help with this? > You can however still use Freevo with TV without the TV.xml, it should > already work, but you just don't see any programs in the program > guide. > > > Michel > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > Hi Michel, > > Tv_grab_India is not so what I have to do how can I create that . > I > > have to create at the time of installation or I can create after > > installation too. > > > > Regards, > > Yugandhar. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > > Of Michel Hoogervorst > > Sent: Tuesday, June 12, 2007 5:35 PM > > To: freevo-users@lists.sourceforge.net > > Cc: Yugandhar G.V > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > > > Yugandhar, > > > > If you have installed xmltv you can issue a "tv_grab_xx > /tmp/TV.xml" > > to make things work (where xx should be your country-code). > > > > > > Michel > > > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > > Hi Michel, > > > Once again thanks for your reply, I have followed the steps > given > > by > > > you. But I had one problem I have changed freq.py file as specified by > you > > > and entered the channel list for India as follows: > > > CHANLIST = { > > > "nl-multikabel" : dict(PAL_MULTIKABEL), > > > "us-bcast" : dict(NTSC_BCAST), > > > "india" : dict(PAL_INIDA), > > > ..... > > > } > > > After this I have to make PAL_INDIA with the channels and frequency my > > > question I think the frequencies entered in freq.py is kilohertz am I > > right > > > I also I have convert the megahertz frequency to kilohertz and enter in > > the > > > table or else I can directly enter the megahertz frequency One more > > question > > > is have installed XML TV but still I can't able to see the TV.xml file > can > > u > > > just tell me why I can't able to see the TV.xml file in my system. > > > > > > Regards, > > > Yugandhar. > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf > > > Of Michel Hoogervorst > > > Sent: Tuesday, June 12, 2007 11:47 AM > > > To: Yugandhar G.V > > > Subject: Re: [Freevo-users] Regarding chanlist in freevo.conf > > > > > > Yugandhar, > > > > > > What you entered in freq.py should look something like this: > > > CHANLIST = { > > > "nl-multikabel" : dict(PAL_MULTIKABEL), > > > "us-bcast" : dict(NTSC_BCAST), > > > ..... > > > } > > > > > > Where the "nl-multikabel" line matches the "PAL_MULTIKABEL" below: > > > > > > PAL_MULTIKABEL = [ > > > ("10", 208000 ), # Nederland 1 > > > ("11", 216000 ), # Nederland 2 > > > ("12", 224000 ), # Nederland 3 > > > ] > > > > > > Where this is ("channel", frequency). > > > In your local_conf.py, you should match that like this: > > > > > > TV_CHANNELS = [ > > > ('1.tvgids.nl', 'Nederland 1', '10'), > > > ('2.tvgids.nl', 'Nederland 2', '11'), > > > ('3.tvgids.nl', 'Nederland 3', '12'), > > > ] > > > > > > Where this is ('xmltv_id', 'Display name', 'channel') > > > > > > The xmltv_id should match your TV.xml (made by xmltv). This is not > > > nessacary for TV to work, but is needed for the tv-guide only. > > > > > > Hope this is clear? > > > > > > > > > Michel > > > > > > 2007/6/12, Yugandhar G.V <[EMAIL PROTECTED]>: > > > > > > > > Hi Michel, > > > > I am not using the cable for the Hauppauge card I am using the > > > > antenna to get the channels. So, I want to scan for the channels first > > and > > > > list down all the frequencies and then I have to edit the freq.py > file. > > If > > > > you any thing about this please help me. > > > > After editing freq.py file for my country(India) just tell me > > what > > > > are all the things to be done. Should I go directly to TV guide and it > > > shows > > > > the channels list so that if I enter on a particular channel can I > able > > > to > > > > watch the tv. > > > > > > > > Regards, > > > > Yugandhar. > > > > > > > > > > > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users