Peace And Health, Dan I replaced the 3.6V battery, tested the battery which registered good. In the beginning I used the reset button to jump start the computer, which worked for a week. Now it only lights up and no noise. Its not the power because it lights up right? . Do you think if I replaced the mother board, I could get some power into it. I unplugged everything except the key-board and monitor, with the same results. what is your thoughts?
choice On May 7, 2009, at 10:18 AM, Dan wrote: > > At 11:33 AM -0400 5/6/2009, photoartcom wrote: >> >> They seem to power up, meaning the lights come on. I can hear it >> trying to start up but no >> video (monitor), no tone, just lights. > > Lack of bong is a total failure of the self-test - probably the PMU > isn't running. So Peter's suggestion of replacing the PRAM battery > is the first step. > > Odd that two machines would go down at the same time this way tho. > What else happened? What is plugged into them? > > - Dan. > -- > - Psychoceramic Emeritus; South Jersey, USA, Earth > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---