We have a GB-1000 unit with four NICs. Our configuration is 1 external interface, 2 Protected interfaces and 1 PSN interface. We recently acquired an additional block of real world IP addresses from our ISP. This block is not contiguous with our existing block of real world IP addresses. Is it possible to have two real world IP ranges assigned to a single external interface? Is so, what are the necessary configuration changes that need to be made?
For the sake of example I would like to do the following: 1. Route external subnet 1.2.3.4/27 to the external interface 2. Route external subnet 2.3.4.5/27 to the external interface Matthew R. Repko Advanced Automation Associates, Inc. 640 Rice Boulevard Exton, PA 19341 (610) 458-8700 (610) 458-0606 F <mailto:[EMAIL PROTECTED]> www.aaainc.com The information contained in this communication may be confidential, is intended for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communications, or any of its contents, is strictly prohibited. ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
