On Wed, 2010-11-03 at 22:04 +0100, Kai-Martin Knaak wrote: > Peter Clifton wrote: > > > I've got a load of changes I've been working on recently in PCB+GL, this > > time on my "local_customisation_no_pours" branch. > > For those not familiar with git, these are the commands I ran to install > Peters version in /usr/local/bin/pcb-test : > > /------------------------ > git clone git://repo.or.cz/geda-pcb/pcjc2.git > cd pcjc2 > git checkout -b local_customisation_no_pours
Did this work and give you the 3D / GL stuff? (Does git automatically pick the right remote branch?) I would have done: git checkout -b local_customisation_no_pours origin/local_customisation_no_pours But since I learnt to do that some while back, things might have got easier since. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user