Hi Peter, > -----Original Message----- > From: geda-user-boun...@moria.seul.org > [mailto:geda-user-boun...@moria.seul.org] On Behalf Of Peter Clifton > Sent: Thursday, November 04, 2010 1:51 AM > To: gEDA user mailing list > Subject: Re: gEDA-user: PCB+GL Testers (please test) > > On Wed, 2010-11-03 at 22:04 +0100, Kai-Martin Knaak wrote: > > Peter Clifton wrote: > > > > > I've got a load of changes I've been working on recently > in PCB+GL, > > > this time on my "local_customisation_no_pours" branch. > > > > For those not familiar with git, these are the commands I ran to > > install Peters version in /usr/local/bin/pcb-test : > > > > /------------------------ > > git clone git://repo.or.cz/geda-pcb/pcjc2.git > > cd pcjc2 > > git checkout -b local_customisation_no_pours > > Did this work and give you the 3D / GL stuff? (Does git > automatically pick the right remote branch?) > > I would have done: > > git checkout -b local_customisation_no_pours > origin/local_customisation_no_pours > > But since I learnt to do that some while back, things might > have got easier since. > > -- > Peter Clifton > > Electrical Engineering Division, > Engineering Department, > University of Cambridge, > 9, JJ Thomson Avenue, > Cambridge > CB3 0FA > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) > > >
I tried the above and ran into trouble with the requirement of gtkglext-1.0: there seems to be no such RPM package available for Fedora 13 ;-( So I will try to find (or build) and install a package this weekend. To be continued ... Kind regards, Bert Timmerman _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user