Have you set up sensors.conf, and run sensors-detect? Also you need sensors -s or the proper init to load the settings.
BillK On Thu, 2003-09-25 at 23:01, mathieu wrote: > > The fan headers you don't have anything connected to, so don't worry about > > them. The VCore 2 I assume your machine does not use (do you have a P4 by > > athlon xp 1700+ > > > any chance?). The -12v and -5v lines being way off probably means your PSU > > isn't supplying them, or is doing an extremely bad job of it. There is > > very, very little equipment around that uses these lines, so again, don't > > worry about them. The temp2 is quite high, I'd look into better cooling for > > your CPU. Unless the machine is stable in which case I wouldn't worry again > > I've lots of things in my box: 4 hdds, dvd, cd, zip, ... Could this be the > explanation of the high temps and bad voltage? Should I take some things out? > Add new fans? > What would be the acceptable temperature for temp2? (and for hdds btw) -- William Kenworthy <[EMAIL PROTECTED]> -- [EMAIL PROTECTED] mailing list
