On Thursday 02 October 2003 03:12 pm, Ernie Schroder wrote: > On Thursday 02 October 2003 02:45 pm, Frank R Callaghan wrote: > > Hi All, > > > > I've just installed Gentoo on my work system (replacing RH) it work > > really well - fast but I have two problems I need help with, > > > > 1) my usb CF card reader does not work, > > I complied my kernel with genkernel defaults, > > > > lsmod gives:- > > Module Size Used by Tainted: PF > > msdos 5100 0 (autoclean) > > fat 29752 0 (autoclean) [msdos] > > serial 48996 0 (autoclean) > > isa-pnp 28068 0 (autoclean) [serial] > > vmmon 22900 0 > > floppy 47996 0 (autoclean) > > tulip 38912 1 > > usb-storage 60668 0 (unused) > > hid 13908 0 (unused) > > usb-ohci 17216 0 (unused) > > usbcore 55488 1 [usb-storage hid usb-ohci] > > > > but, /dev has only sda not sda1, sda2....... and sda is a symlink > > /dev/sda -> scsi/host0/bus0/target0/lun0/disc > > > > I guess this is some form of devfs majic !?? how can I make this > > work? > > > > 2) My screen now tares while moving windows around, > > I'm using vmware so I need DGA my vidio card is > > an 'ATI Rage XL 16M AGP 2X' I am currently > > using the generic ati Driver. > > > > Does anyone have a good XF86Config example > > for this setup ? > >
> > What happens if you do (as root): > fdisk -l /dev/sda ? nothing ! > then > fdisk -l /dev/sda1 ? nothing, just trying fdisk /dev/sda returns 'Unable to open /dev/sda' > Is there media with a valid partition table in the reader? yes > Unplug the reader and plug it back in and post the last 5 or so lines > of "dmesg" usb.c: USB disconnect on device 00:07.4-2 address 5 hub.c: new USB device 00:07.4-2, assigned address 6 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 6 -- [EMAIL PROTECTED] mailing list
