Hi Peter,

On Sunday 19 Oct 2003 18:03, Stephane Brossier wrote:
> bash-2.05b# grep HCI /usr/src/linux/.config
> # CONFIG_USB_EHCI_HCD is not set
> CONFIG_USB_UHCI=m
> CONFIG_USB_UHCI_ALT=m
> # CONFIG_USB_OHCI is not set

You only need one of USB_UHCI and USB_UHCI_ALT.  They conflict.  In your
case CONFIG_USB_UHCI_ALT=m is the correct one.

I tried both and none work :-(


With 'uhci" module I got the following:
bash-2.05b# lsmod
Module                  Size  Used by    Tainted: P
ide-scsi                7568   0
sr_mod                 14648   0  (unused)
sg                     29900   0
sd_mod                 11020   0  (unused)
vpnmod                187808  -1  (unused)
prism2_pci             57008   1  (autoclean)
p80211                 17036   1  [prism2_pci]
usb-storage            22264   0  (unused)
scsi_mod               89268   4  [ide-scsi sr_mod sg sd_mod usb-storage]
uhci                   23536   0  (unused)
usbcore                56000   1  [usb-storage uhci]

And it results in the following outputs:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:07.3
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.

-> It seems that up to this point everything works fine,
the modules are loaded correctly by the kernel. I still don't
have any entries in /dev/sd* though.

The problem seems to be that when I plug the camera in  the USB
port, nothing happens. I still don't have any entries under /dev/sd*, and if
I grep syslog i have no traces. Could it be that my USB port don't work?
I never used USB on linux.

I start to get desparate :-(

Thanks for your help,

S.

_________________________________________________________________
Cheer a special someone with a fun Halloween eCard from American Greetings! Go to http://www.msn.americangreetings.com/index_msn.pd?source=msne134



-- [EMAIL PROTECTED] mailing list



Reply via email to