Hi Garey,
On Tue, Nov 1, 2011 at 7:56 PM, Garey Mills <gmi...@library.berkeley.edu>wrote:
> Daniele -
>
> On the page
> http://docs.geoserver.org/latest/en/user/data/gdal.html?highlight=gdal
> the instructions have you go to the ImageI/O-Ext releases page. There you
> get a number of libraries that you download and install in
> $JAVA_HOME/jre/lib/i386.
>
These ones are the native libs (*.so/*.dll).
>
> In the ImageIO-Ext Setup Guide, for imageio-ext one downloads the
> sources and runs 'mvn install'.
>
> If I have already downloaded an imageio release following the
> Geoserver doc page, will 'mvn install' replace those libraries in
> jre/lib/i386,
>
Nope.
> or do I have to clear them out manually? Where does the mvn install
> install the libraries?
>
The maven install only creates "jar" libraries which will be put on your
local maven repository (usually on /home/youruser/.m2/repository).
However, in case you have already downloaded the imageio-ext extensions
package (the set of jars referred by the first section of the instructions,
of the previous geoserver link, point 3 and 4 ) you can use them. The
imageio-ext jars you have built should be the same provided with geoserver.
The reason to follow the imageio-ext setup guide is to build the GDAL
native libraries dependencies to be used by those jars since the GDAL libs
provided in the download section wasn't working on your machine due to a
different set of underlying runtime libraries on your system.
Hope this helps. Please, let me know in case you have more troubles.
Daniele
>
> Garey
>
>
> On 10/31/2011 12:42 PM, Daniele Romagnoli wrote:
>
> Hi Garey,
> using GDAL 1.7.3, I would recommend using with the ImageI/O Setup guide
> 1.1.1 (Not sure whether the paragraph number is the same).
>
> http://java.net/downloads/imageio-ext/Documentation/ImageioExt-SetupGuide-1.1.pdf
>
> Anyway, if my memory serves me right, these gdal versions also require you
> specify "--with-threads" in the configure. I remember I saw a warning
> message on the JNI methods call when loading them without this flag being
> set.
>
> Hope this helps.
> Regards,
> Daniele
>
> On Mon, Oct 31, 2011 at 7:22 PM, Garey Mills
> <gmi...@library.berkeley.edu>wrote:
>
>> Daniele -
>>
>> I found the Image I/O Setup Guide 1.0.8 again and followed the
>> instructions for Linux. I found the version 7 MrSid DSDK and installed JAI
>> and the JAI-ImageIO Toolkit. I used gdal-1.7.3 and did not apply the
>> patches for gdal1.4.5. This is how I configured GDAL:
>>
>> ./configure --with-mrsid=/opt/Geo_DSDK --with-jp2mrsid=yes
>> --with-png=internal --with-libtiff=internal --with-geotiff=internal
>> --with-jpeg=internal --with-gif=internal --with-hide-internal-symbols
>>
>> once I had compiled and installed GDAL, I ran SWIG, though, I left the
>> lines in GDALmake.opt like this
>>
>> CFLAGS = -g -O1 -fvisibility=hidden -Wall
>> -Wdeclaration-after-statement $(USER_DEFS)
>> CXXFLAGS = -g -O1 -fvisibility=hidden -Wall $(USER_DEFS)
>>
>> assuming the optimization change to be what was required. I then copied
>> the libraries SWIG generated to $JAVA_HOME/jre/lib/i386
>>
>>
>>
>> In any case, when I try to run GeoServer, I get this at startup
>>
>>
>> WARNING: Failed to load the GDAL native libs. This is not a problem
>> unless you need to use the GDAL plugins: they won't be
>> enabled.java.lang.UnsatisfiedLinkError: org.gdal.gdal.gdalJNI.AllRegister()V
>>
>> Garey
>>
>> On 10/31/2011 1:32 AM, Daniele Romagnoli wrote:
>>
>> Hi Garey,
>>
>> On Fri, Oct 28, 2011 at 7:14 PM, Garey Mills <gmi...@library.berkeley.edu
>> > wrote:
>>
>>> Daniele -
>>>
>>> First let me apologize for having asked this question twice. I just
>>> plain forgot that I had encountered this problem before.
>>>
>> Don't worry, it's not a problem. I was just saying that in case you have
>> already solved it in the past somehow (and documented how to do it) and you
>> have forgot it :)
>>
>>
>>> Is the version of GDAL 1.7.3 essential? I could download GDAL
>>> 1.8.0-4?
>>>
>> We didn't tried GDAL 1.8 yet with imageio-ext, just tested with 1.7.3,
>> therefore I have no idea.
>> The only thing which could do the difference is related to the JNI
>> bindings which are invoked by ImageIO-ext. I don't know if something has
>> been changed on that side (We didn't looked at the swig interface of 1.8
>> yet).
>> You could do a try and see how it works. In case it works, please, let us
>> know so we can report that.
>>
>> Hope this helps.
>> Regards,
>> Daniele
>>
>>>
>>> Garey
>>>
>>>
>>> On 10/28/2011 1:52 AM, Daniele Romagnoli wrote:
>>>
>>> Hi Garey,
>>> if my memory serves me right, you have already encountered this error a
>>> few months ago which is mainly related to the underlying set of libraries
>>> available on your machine.
>>> I did a quick search on the web and I found several forum/discussions
>>> talking about this issue, as well as several solutions/ways/attempts to fix
>>> it. Some of them worked for some users while some others ways worked for
>>> other ones. Look for "/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not
>>> found" on the web. I'll suggest to read some of these threads to better
>>> investigate on which dependencies you have on your machine and how to
>>> add/depends on the required ones. (Sometime it's seems only matter of
>>> updating a few symbolic links).
>>>
>>> I'm sorry about not being able to provide you more helps on that topic
>>> but I guess it's a typical dependencies problem which should be analyzed
>>> case by case.
>>>
>>> Alternatively, you can build GDAL 1.7.3 by yourself on your system
>>> (therefore using the set of libraries you have on your own machine).
>>> I can forward you an email I sent to you a few months ago, with pointers
>>> to the paragraphs of the ImageIO-Ext setup document referring to how to
>>> build the GDAL native part. Just let me know.
>>>
>>> Anyway, let us know if you have both more questions as well as reports
>>> on how you have fixed that problem too, so we can learn from your
>>> experience.
>>>
>>> Best Regards,
>>> Daniele
>>>
>>>
>>> On Thu, Oct 27, 2011 at 10:49 PM, Garey Mills <
>>> gmi...@library.berkeley.edu> wrote:
>>>
>>>> Andrea -
>>>>
>>>> Thanks for the info. I downloaded gdal-1.7.3 and installed it as
>>>> suggested. I am now getting this error:
>>>>
>>>> Oct 27, 2011 1:42:35 PM
>>>> it.geosolutions.imageio.gdalframework.GDALUtilities loadGDAL
>>>> WARNING: Failed to load the GDAL native libs. This is not a problem
>>>> unless you need to use the GDAL plugins: they won't be
>>>> enabled.java.lang.UnsatisfiedLinkError:
>>>> /usr/local/jdk1.6.0_23/jre/lib/i386/libgdaljni.so: /usr/lib/libstdc++.so.6:
>>>> version `GLIBCXX_3.4.9' not found (required by
>>>> /usr/local/jdk1.6.0_23/jre/lib/i386/libgdal.so.1)
>>>>
>>>> in /usr/lib I have
>>>>
>>>> libstdc++.so.6.0.8
>>>>
>>>> What's the best way of getting gdal working from here?
>>>>
>>>> Garey
>>>>
>>>>
>>>>
>>>>
>>>> On 10/27/2011 11:16 AM, Andrea Aime wrote:
>>>>
>>>> On Thu, Oct 27, 2011 at 7:04 PM, Garey Mills <
>>>> gmi...@library.berkeley.edu> wrote:
>>>>
>>>>> Robert -
>>>>>
>>>>>
>>>>> Thank you. Commenting out
>>>>>
>>>>>
>>>>>
>>>>> <Listener
>>>>> className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
>>>>>
>>>>>
>>>>> in server.xml worked!
>>>>>
>>>>> Now the next thing I want to do is to make the Imagecollection
>>>>> plugin work with MrSid images. Does anyone have any idea what the steps
>>>>> would be to do that? In the imagecollection module, the only mention of
>>>>> formats seems to be in Utils.java where the code checks the file
>>>>> extension.
>>>>> However, though I add in '.sid', there, when I try to publish a MrSid
>>>>> image, MrSid is not one of the image formats that show up.
>>>>>
>>>>
>>>> Hmm... do you have the support to read MrSid files to start with?
>>>> It's part of the GDAL data sources, requires the right GDAL native libs
>>>> to be installed, distributed
>>>> along with imageio-ext itself.
>>>>
>>>> Anyways, don't know if having those is sufficient.. but for sure if
>>>> don't have a MrSid store showing
>>>> up in the store list when you try to create a new store you won't be
>>>> able to open a .sid file
>>>>
>>>> Cheers
>>>> Andrea
>>>>
>>>>
>>>> --
>>>> -------------------------------------------------------
>>>> Ing. Andrea Aime
>>>> GeoSolutions S.A.S.
>>>> Tech lead
>>>>
>>>> Via Poggio alle Viti 1187
>>>> 55054 Massarosa (LU)
>>>> Italy
>>>>
>>>> phone: +39 0584 962313 <%2B39%200584%20962313>
>>>> fax: +39 0584 962313 <%2B39%200584%20962313>
>>>>
>>>> http://www.geo-solutions.it
>>>> http://geo-solutions.blogspot.com/
>>>> http://www.youtube.com/user/GeoSolutionsIT
>>>> http://www.linkedin.com/in/andreaaime
>>>> http://twitter.com/geowolf
>>>>
>>>> -------------------------------------------------------
>>>>
>>>>
>>>
>>>
>>> --
>>> -------------------------------------------------------
>>> Ing. Daniele Romagnoli
>>> GeoSolutions S.A.S.
>>> Software Engineer
>>>
>>> Via Poggio alle Viti 1187
>>> 55054 Massarosa (LU)
>>> Italy
>>>
>>> phone: +39 0584 962313 <%2B39%200584%20962313>
>>> fax: +39 0584 962313 <%2B39%200584%20962313>
>>>
>>> http://www.geo-solutions.it
>>> http://geo-solutions.blogspot.com/
>>> http://www.youtube.com/user/GeoSolutionsIT
>>> http://it.linkedin.com/in/danieleromagnoli
>>>
>>>
>>> -------------------------------------------------------
>>>
>>>
>>
>>
>> --
>> -------------------------------------------------------
>> Ing. Daniele Romagnoli
>> GeoSolutions S.A.S.
>> Software Engineer
>>
>> Via Poggio alle Viti 1187
>> 55054 Massarosa (LU)
>> Italy
>>
>> phone: +39 0584 962313 <%2B39%200584%20962313>
>> fax: +39 0584 962313 <%2B39%200584%20962313>
>>
>> http://www.geo-solutions.it
>> http://geo-solutions.blogspot.com/
>> http://www.youtube.com/user/GeoSolutionsIT
>> http://it.linkedin.com/in/danieleromagnoli
>>
>>
>> -------------------------------------------------------
>>
>>
>
>
> --
> -------------------------------------------------------
> Ing. Daniele Romagnoli
> GeoSolutions S.A.S.
> Software Engineer
>
> Via Poggio alle Viti 1187
> 55054 Massarosa (LU)
> Italy
>
> phone: +39 0584 962313
> fax: +39 0584 962313
>
> http://www.geo-solutions.it
> http://geo-solutions.blogspot.com/
> http://www.youtube.com/user/GeoSolutionsIT
> http://it.linkedin.com/in/danieleromagnoli
>
>
> -------------------------------------------------------
>
>
--
-------------------------------------------------------
Ing. Daniele Romagnoli
GeoSolutions S.A.S.
Software Engineer
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 962313
http://www.geo-solutions.it
http://geo-solutions.blogspot.com/
http://www.youtube.com/user/GeoSolutionsIT
http://it.linkedin.com/in/danieleromagnoli
-------------------------------------------------------
------------------------------------------------------------------------------
RSA® Conference 2012
Save $700 by Nov 18
Register now!
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users