How to modify the code can not get DHCP information on the 2nd?(GPXE only used
to boot the system from ISCSI)
Is to remove this step.
net0: 00:0 c:: 29:08:11:35 on UNDI-PCI02: 01.0 (OPEN)
[Link: up, TX: 0 TXE: 0 TX: 0 rxe: 0]
DHCP (net0 00:0 c: 29:08:11: d5 ).... ok
net0: 192.168.0.202/255.255.255.0
This can speed up boot speed.
Normal GPXE run to start from the boot system tftp process takes about 8
seconds or so
If removed from the second time for DHCP information will only need a very
quick 2.5 seconds.
_______________________________________________
gPXE mailing list
gPXE@etherboot.org
http://etherboot.org/mailman/listinfo/gpxe
