yes thankyou Shao Miller Your method is useful ：） -sqwbwh
At 2010-11-05 21:13:33，"Miller, Shao" <shao.mil...@yrdsb.edu.on.ca> wrote: >________________________________________ >From: gpxe-boun...@etherboot.org [mailto:gpxe-boun...@etherboot.org] On Behalf >Of sqwbwh >Sent: Friday, November 05, 2010 09:05 >To: GPXE Mailing List >Subject: [gPXE] How to modify the code can not get DHCP information on the2nd > > >How to modify the code can not get DHCP information on the 2nd?(GPXE only used >to boot the system from ISCSI) >Is to remove this step. >net0: 00:0 c:: 29:08:11:35 on UNDI-PCI02: 01.0 (OPEN) > [Link: up, TX: 0 TXE: 0 TX: 0 rxe: 0] >DHCP (net0 00:0 c: 29:08:11: d5 ).... ok >net0: 192.168.0.202/255.255.255.0 > >This can speed up boot speed. >Normal GPXE run to start from the boot system tftp process takes about 8 >seconds or so >If removed from the second time for DHCP information will only need a very >quick 2.5 seconds. > >----- > >You most likely want the 'use-cached' option. It is DHCP gPXE encapsulated >option number 178. Or, you can set it in an embedded script: > > #!gpxe > set use-cached 1 > autoboot > >- Shao Miller
_______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe
