2010/11/5 sqwbwh <sqw...@126.com>: > > How to modify the code can not get DHCP information on the 2nd?(GPXE only > used to boot the system from ISCSI) > Is to remove this step. > net0: 00:0 c:: 29:08:11:35 on UNDI-PCI02: 01.0 (OPEN) > [Link: up, TX: 0 TXE: 0 TX: 0 rxe: 0] > DHCP (net0 00:0 c: 29:08:11: d5 ).... ok > net0: 192.168.0.202/255.255.255.0 > > This can speed up boot speed. > Normal GPXE run to start from the boot system tftp process takes about 8 > seconds or so > If removed from the second time for DHCP information will only need a very > quick 2.5 seconds.
What file and version are you using? It sounds as if you're using undionly.kpxe or a .pxe file. undionly.kkpxe will skip this second DHCP request but certain hardware/firmware has issues with this, assuming you trust the stability of your OEM's PXE/UNDI stack. -- -Gene _______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe