________________________________________ From: gpxe-boun...@etherboot.org [mailto:gpxe-boun...@etherboot.org] On Behalf Of sqwbwh Sent: Friday, November 05, 2010 09:05 To: GPXE Mailing List Subject: [gPXE] How to modify the code can not get DHCP information on the2nd
How to modify the code can not get DHCP information on the 2nd?(GPXE only used to boot the system from ISCSI) Is to remove this step. net0: 00:0 c:: 29:08:11:35 on UNDI-PCI02: 01.0 (OPEN) [Link: up, TX: 0 TXE: 0 TX: 0 rxe: 0] DHCP (net0 00:0 c: 29:08:11: d5 ).... ok net0: 192.168.0.202/255.255.255.0 This can speed up boot speed. Normal GPXE run to start from the boot system tftp process takes about 8 seconds or so If removed from the second time for DHCP information will only need a very quick 2.5 seconds. ----- You most likely want the 'use-cached' option. It is DHCP gPXE encapsulated option number 178. Or, you can set it in an embedded script: #!gpxe set use-cached 1 autoboot - Shao Miller _______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe
