In short, on my Acer Aspire One, I see the same behavior coming out of
standby or hybernate. Machine revives without speech. I hit the hotkey
to load Window-Eyes, it loads, and all is well. Under 7.01 Win-Eyes
revived along with the machine consistently in both standby and hybernate.
-L
David wrote:
Just one new observation, made this morning on my desktop, in
conjunction with this thread:
I didn't leave my PC unused long enough for it to actually hybernate.
Still it got time enough, that it did go into the STANDBY state. When
hitting a key (in my test I just used the CTRL key), The system woke
up. I know for sure, as the hard disk started to spin, and finished
it's (whatever) loading. Still, the WE did not load. Soon as I hit
alt-ctrl-w, we reloaded itself, and here I am, writing this message.
Oh, yes, let me tell you, to make sure of my observation, I did
actually try to 'force' the machine into standby, via the start menu.
In other words, the GW micro staff, might have to search for the root
of this problem, even earlier in the process; since the machine will
enter standby mode, a good time before it will actually hybernate.
Wonder if the others on the list, who has encountered the reviving
problem, from hybernate mode, could please try out, to see if they too
have the same loss of WE when coming out of standby mode. Press
start, then u (turn off), then S (standby), and your system will put
itself into the mode, in a sec or so. Please note, that your fan etc,
will still be running, so basically there is little indication, that
standby mode has been activated. You might be able to hear the hard
disk stop spinning. Leave your PC for a few seconds, then press any
key to rewake it; and see if WE loads.
Thanks, everyone.
----- Original Message ----- From: "Paul Mimms" <[email protected]>
To: "David" <[email protected]>
Cc: <[email protected]>; "Michael D. Lawler" <[email protected]>
Sent: Saturday, June 13, 2009 5:34 AM
Subject: Re: WE-7-1-beta1 Not Reviving itself after hybernation
I have also noticed the same behavior on my Asus netbook, including
the need to actually restart WE.On 6/12/2009 5:34 AM, David wrote:
OK, I cdon't know, if my experience will help here. But I can
confirm, that my Desktop, was in and out of Hybernation, frequently,
with WE7.01 running, and no problems at all. WE would load,
immediately and smoothly. When installing the 7.1b1 things changed,
and WE consequently does not load, when coming out of hybernation. I
did start NVDA, to check if there was any error messages, from WE
trying to load, but no such a thing. The system had - in a couple of
my tests - only the OE, and Windows Live running in addition to WE,
when entering hybernation. Coming out, OE and WL had loaded
perfectly, but no Æ WE...
I jnust want to make one note her, even if I don't know if it will
have any impact. Yesterday, shortly after installing WE7.1b1, I did
make an update of my microsoft products (Start \ Windows update). It
did download and update my windows, and office installations. I have
noticed, that users have told hybernation working perfectly on one
system, but not the other. Just wonder if this could be due to the
microsoft update (lately) that does some kind of a 'skippy-jump',
that WE doesn't like, hence We will not only hybernate, but simply
'go home for a good nights sleep'. :) Funny thing is that the hotkey
(alt-ctrl-w) seems to always load WE QUICKLY when this issue happens.
I am running XP PRO SP3, and at least now, have all updates
installed :)
From: "Michael D. Lawler" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 11, 2009 3:40 PM
Subject: Re: WE-7-1-beta1 Not Reviving itself after hybernation
We have had other reports of this and are currently working on
duplicating the problem.
At 05:12 PM 6/10/2009, you wrote:
Hi all,
This is a new one. Under 7.01, on my Acer Aspire One WE has
always revived correctly when I come out of hybernate or stand
by. 7.1-beta1 is not doing so. Settings have not changed, both
checkboxes are checked under start-up options. I can restart WE
with the hotkey, but in multiple trials, it does not revive on its
own. Anything else I should try, or is this a bug?
-Len
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will
receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be searched through and
sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the
message.
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[email protected]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive
it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the
message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the
message.
__________ Information from ESET Smart Security, version of virus
signature database 4152 (20090612) __________
The message was checked by ESET Smart Security.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo,
and can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the
message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body
of the message.
