Hybernate and stand by will behave the same. I
believe that anyone who doesn't return to the
login screen will currently have this problem and we are investigating.
At 03:50 AM 6/15/2009, you wrote:
Just one new observation, made this morning on
my desktop, in conjunction with this thread:
I didn't leave my PC unused long enough for it
to actually hybernate. Still it got time
enough, that it did go into the STANDBY state.
When hitting a key (in my test I just used the
CTRL key), The system woke up. I know for sure,
as the hard disk started to spin, and finished
it's (whatever) loading. Still, the WE did not
load. Soon as I hit alt-ctrl-w, we reloaded
itself, and here I am, writing this message.
Oh, yes, let me tell you, to make sure of my
observation, I did actually try to 'force' the
machine into standby, via the start menu. In
other words, the GW micro staff, might have to
search for the root of this problem, even
earlier in the process; since the machine will
enter standby mode, a good time before it will
actually hybernate. Wonder if the others on the
list, who has encountered the reviving problem,
from hybernate mode, could please try out, to
see if they too have the same loss of WE when
coming out of standby mode. Press start, then u
(turn off), then S (standby), and your system
will put itself into the mode, in a sec or so.
Please note, that your fan etc, will still be
running, so basically there is little
indication, that standby mode has been
activated. You might be able to hear the hard
disk stop spinning. Leave your PC for a few
seconds, then press any key to rewake it; and see if WE loads.
Thanks, everyone.
----- Original Message ----- From: "Paul Mimms" <[email protected]>
To: "David" <[email protected]>
Cc: <[email protected]>; "Michael D. Lawler" <[email protected]>
Sent: Saturday, June 13, 2009 5:34 AM
Subject: Re: WE-7-1-beta1 Not Reviving itself after hybernation
I have also noticed the same behavior on my
Asus netbook, including the need to actually
restart WE.On 6/12/2009 5:34 AM, David wrote:
OK, I cdon't know, if my experience will help
here. But I can confirm, that my Desktop, was
in and out of Hybernation, frequently, with
WE7.01 running, and no problems at all. WE
would load, immediately and smoothly. When
installing the 7.1b1 things changed, and WE
consequently does not load, when coming out
of hybernation. I did start NVDA, to check if
there was any error messages, from WE trying
to load, but no such a thing. The system had
- in a couple of my tests - only the OE, and
Windows Live running in addition to WE, when
entering hybernation. Coming out, OE and WL
had loaded perfectly, but no Æ WE...
I jnust want to make one note her, even if I
don't know if it will have any impact.
Yesterday, shortly after installing WE7.1b1,
I did make an update of my microsoft products
(Start \ Windows update). It did download and
update my windows, and office installations.
I have noticed, that users have told
hybernation working perfectly on one system,
but not the other. Just wonder if this could
be due to the microsoft update (lately) that
does some kind of a 'skippy-jump', that WE
doesn't like, hence We will not only
hybernate, but simply 'go home for a good
nights sleep'. :) Funny thing is that the
hotkey (alt-ctrl-w) seems to always load WE QUICKLY when this issue happens.
I am running XP PRO SP3, and at least now, have all updates installed :)
From: "Michael D. Lawler" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 11, 2009 3:40 PM
Subject: Re: WE-7-1-beta1 Not Reviving itself after hybernation
We have had other reports of this and are
currently working on duplicating the problem.
At 05:12 PM 6/10/2009, you wrote:
Hi all,
This is a new one. Under 7.01, on my Acer
Aspire One WE has always revived correctly
when I come out of hybernate or stand
by. 7.1-beta1 is not doing so. Settings
have not changed, both checkboxes are
checked under start-up options. I can
restart WE with the hotkey, but in multiple
trials, it does not revive on its
own. Anything else I should try, or is this a bug?
-Len
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave
gw-info in the body of the message.
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[email protected]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the message.
__________ Information from ESET Smart
Security, version of virus signature database 4152 (20090612) __________
The message was checked by ESET Smart Security.
http://www.eset.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body of the message.
--
Michael D. Lawler
Voice 260-489-3671
Fax 260-489-2608
Internet mailto:[email protected]
web http://www.gwmicro.com
ftp ftp://ftp.gwmicro.com
GW Micro, Inc.,
Development Liaison and Technical Support Supervisor
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[email protected] and include leave gw-info in the body
of the message.
