check to make sure the new backplate is not touching the case.
-- J > The original cpu heatsink mounting > hardware connected directly to the > case bottom. The new heatsinks in the > new case required a backplate. > Otherwise, it seems I have everything > connected in the same way as it > was in the original blade server > case. > > Any hints or suggestions are most welcome. > > > Thanks, > > Jim Maki > > ymailto="mailto:jwm_maill...@comcast.net"; > href="mailto:jwm_maill...@comcast.net";>jwm_maill...@comcast.net Check > that the Antec PSU has the same pin connections as the one in the server > case. --
