Looks like he needs to do some port forwarding or open up the required ports for Half Life. I am inside a LAN on a Private Class C of 10.0.0.X. I have forward port 27015 to my Inside IP Address of 10.0.0.X so that people who connect to 27015 will be able to play on my server. Let HL do the rest for you. Easy as that. Oh yeah, what is the outside IP address for you connection?
Dan ----- Original Message ----- From: "Wes Nielson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 03, 2001 12:31 PM Subject: Re: Set the IP the Server should use > > The correct entry is +ip x.x.x.x . I have dual NICs and have no problem > running different servers on each. > > -Wes > > ----- Original Message ----- > From: "Paul McMurphy" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, October 02, 2001 11:54 PM > Subject: Re: Set the IP the Server should use > > > > > > I had the same setup. One nic out side my firewall and one on my internal > > LAN I tried the -ip x.x.x.x command on startup of the HL server and could > > not force it to use the external nic. I reverted back to only using one > nic > > through my firewall. > > > > ----- Original Message ----- > > From: Mike <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, October 03, 2001 9:36 AM > > Subject: RE: Set the IP the Server should use > > > > > > > > > > For me the internet connection device is the key. I use a linksyss > > > router/gateway. I have to forward the port (ie: 27005 - 27030) to the > > > computers ip behind the router. When I look at the ips on the net I see > > > both the ip for the computer and the router, but that's because I am > > behind > > > the router, everyone else sees only the router ip. > > > > > > Mike > > > > > > -----Original Message----- > > > From: pakmann [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, October 03, 2001 1:17 AM > > > To: [EMAIL PROTECTED] > > > Subject: Set the IP the Server should use > > > > > > > > > Hi, > > > > > > I have a problem setting up my server. I have a LAN and an Internet > > > Connection on my machine. Everytime I start the Server it takes the IP > of > > > the LAN Device and send it to the Master Servers. So Nobody can connect > to > > > my Server if he dont know the correct ip. > > > > > > Is there any way to tell the Server which IP it should sed to the master > > > servers? > > > > > > thx > > > Pakmann > > > > > > > > > > > > > > > > > > > > > >
