Thanks Stan. At least someone fully understands what I was going on about. Yes, I'm still over on the cs forums and recently onto counter-server with ronin and gang. I haven't been able to post to the list for several months due to my isp changing the smtp server's addy (grr..)
See ya around, Lythium -----Original Message----- From: Stan Hoeppner [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 03, 2001 7:31 PM To: [EMAIL PROTECTED] Subject: RE: Set the IP the Server should use > (BTW-This has > nothing to do > with "loop back" which is 127.0.0.1 and used mostly for interface > testing). The "loopback" that Lythium was referring to is the ability of the NAT device to allow a connection attempt originating on the LAN interface side of the router to connect to the WAN interface IP, and then be NATed back thru the LAN interface to an internal LAN private IP address of the HLDS server. This allows an internal LAN HL client to connect to the public IP address of the HLDS server, instead of connecting to the private LAN IP address of the HLDS server. BTW, good to see you back on the HLDS list Lythium...hadn't seen anything from you in a while. You still active on the CounterStrike forums? StanTheMan TheHardwareFreak www.hardwarefreak.devastation.cc [EMAIL PROTECTED] > -----Original Message----- > From: Timothy J. Outman Jr. [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, October 03, 2001 12:26 PM > To: [EMAIL PROTECTED] > Subject: RE: Set the IP the Server should use > > > > Hi, > > What kind of router do you have? When you set up NAT, you also want > to set up port address translations (PAT) for 27015 and 27010 to > goto the correct > internal private IP address from the Internet. (BTW-This has > nothing to do > with "loop back" which is 127.0.0.1 and used mostly for > interface testing). > > > Here's an example with PAT enabled: > > Unsolicited Connection Request --> Port 27015 --> Public IP > 16.139.48.225 --> Private IP 192.168.1.225 > > > Here's what happens with PAT unconfigured: > > Unsolicited Connection Request --> Port 27015 --> Public IP > 16.139.48.225 --> PACKET DROPPED > > > BTW-You also need to create a mapping to allow ICMP to that private > address as well. > > Regards, > > Tim > > (Dr. Atlantis) > > 216.139.48.40 - Atlantis III > 216.139.48.45 - Julie Clemens Death Chamber > 216.139.48.251 - Team Atlantis (tfc) > > > -----Original Message----- > From: pakmann [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, October 03, 2001 1:17 AM > To: [EMAIL PROTECTED] > Subject: Set the IP the Server should use > > > > Hi, > > I have a problem setting up my server. I have a LAN and an Internet > Connection on my machine. Everytime I start the Server it takes the IP > of the LAN Device and send it to the Master Servers. So Nobody > can connect to > my Server if he dont know the correct ip. > > Is there any way to tell the Server which IP it should sed to the > master servers? > > thx > Pakmann > > > >
