Yes, but I am not having the problem! I am responding to the issue, not starting a new thread.
I guess I need to ask differently. Nikolay Shopik, What is the value of sv_maxrate when you are having your problems? Thanks. } -----Original Message----- } From: hlds_linux-boun...@list.valvesoftware.com [mailto:hlds_linux- } boun...@list.valvesoftware.com] On Behalf Of ics } Sent: Sunday, June 07, 2009 1:14 PM } To: Half-Life dedicated Linux server mailing list } Subject: Re: [hlds_linux] L4D actual tickrate } } By entering the cvar, you would know that the default value is 0 } (anything between 0-30000), max is 30000. } } -ics } } Guy Watkins kirjoitti: } > I was asking the value, not the definition! } > If it is too low you will get choke. But the server control this. } > } > } -----Original Message----- } > } From: hlds_linux-boun...@list.valvesoftware.com [mailto:hlds_linux- } > } boun...@list.valvesoftware.com] On Behalf Of ics } > } Sent: Sunday, June 07, 2009 1:02 PM } > } To: Half-Life dedicated Linux server mailing list } > } Subject: Re: [hlds_linux] L4D actual tickrate } > } } > } Max bandwidth rate allowed on server, 0 == unlimited } > } } > } Next time, just type the cvar into server console without the value to } > } see that information. } > } } > } -ics } > } } > } Guy Watkins kirjoitti: } > } > What is the value of: } > } > sv_maxrate } > } > } > } > } -----Original Message----- } > } > } From: hlds_linux-boun...@list.valvesoftware.com } [mailto:hlds_linux- } > } > } boun...@list.valvesoftware.com] On Behalf Of Adam Nowacki } > } > } Sent: Sunday, June 07, 2009 10:12 AM } > } > } To: Half-Life dedicated Linux server mailing list } > } > } Subject: Re: [hlds_linux] L4D actual tickrate } > } > } } > } > } choke = number of updates that were delayed due to rate limit } > } > } if you see choke then rate setting is too low } > } > } } > } > } Nikolay Shopik wrote: } > } > } > I'm running at 20000 rate and actually can handle 30000, have 8 } Mbit } > } > } > link. There no loss at all, thats why I'm surprised to see } choke. } > } And } > } > } > from net_graph I see rate not getting even close to 20Kbit/s } (12-14 } > } max) } > } > } > from server, so changing to 30000 not really do anything. My } server } > } > } > connected to fiber optic and have ping under 5ms. } > } > } > } > } > } > On 07.06.2009 1:47, Richard Eid wrote: } > } > } >> If you are getting choke, raise 'rate' client-side. The } default } > } values } > } > } in } > } > } >> Left 4 Dead will provide for a little bit of choke, but nothing } > } that } > } > } can't } > } > } >> be fixed by upping 'rate'. 20000 should be good enough, but } > } there's } > } > } nothing } > } > } >> wrong with going higher if you have a connection to handle it. } > } > } } > } > } } > } > } _______________________________________________ } > } > } To unsubscribe, edit your list preferences, or view the list } archives, } > } > } please visit: } > } > } http://list.valvesoftware.com/mailman/listinfo/hlds_linux } > } > } > } > } > } > _______________________________________________ } > } > To unsubscribe, edit your list preferences, or view the list } archives, } > } please visit: } > } > http://list.valvesoftware.com/mailman/listinfo/hlds_linux } > } > } > } } > } } > } _______________________________________________ } > } To unsubscribe, edit your list preferences, or view the list archives, } > } please visit: } > } http://list.valvesoftware.com/mailman/listinfo/hlds_linux } > } > } > _______________________________________________ } > To unsubscribe, edit your list preferences, or view the list archives, } please visit: } > http://list.valvesoftware.com/mailman/listinfo/hlds_linux } > } } } _______________________________________________ } To unsubscribe, edit your list preferences, or view the list archives, } please visit: } http://list.valvesoftware.com/mailman/listinfo/hlds_linux _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux