Lawson did extensive studies on the gap the longer the pull , the  
longer the gap and thus more turbulance.

I assume Kendal still does the same thing but Walt used to make tuning  
slides such that they were not pulled more then 1/2 inch for the  
individual buying the horn.

FWIW my Schmid plays better when the spacers are inserted.

Debbie Schmidt Sent from my iPhone

On Dec 1, 2009, at 5:03 PM, [email protected] wrote:

> I didn't consider the gap.
>
> However the gap will be the same length regardless and so I don't  
> see what
> difference it would make if any.
>
> You technically have that gap at every slide that isn't pushed all  
> the way
> in.
>
> -William
>
>
> In a message dated 12/1/2009 4:40:31 P.M. Eastern Standard Time,
> [email protected] writes:
>
> Yes, but that's only true as long as the tuning  slide is pushed in  
> all the
> way home.  When you pull the slide out, you  open up an area inside  
> that
> now has the bore size of whatever the i.d. of your  outer tuning  
> slide tube
> is.  On a normal horn like a Conn, that means  instead of .468, you  
> have a
> spot that's .500 for whatever distance you pulled  the slide out.   
> Same idea
> for your Schmid only in some kind of metric  numbers.  There's not  
> only a
> certain length of larger bore size, but also  a "speed bump" at  
> either end of it
> where it goes back to the normal  bore.  All of that has some effect  
> and
> the effect is different depending  on where in the the horn that you  
> place it,
> as others have  described.
> You could do away with the "gap" if you  decided how far you were  
> going to
> pull the tuning slide and then insert a  couple of pieces of inner  
> tubing of
> just that length.  Then you'd have an  undisturbed bore but you  
> couldn't
> change the tuning unless you also changed  your little pieces of  
> tubing.  Not
> having the gap might not be as good  anyway since hopefully the horn  
> is
> designed to sound better with the slide  pulled a bit.  As I  
> mentioned before
> though, having to pull the slide out  extra far creates a long  
> length of
> larger bore size and that usually isn't the  best for having it play  
> optimally.
> In that case it might help to insert some  correctly sized tubing to  
> fill in
> some of the gap so it responds more  normally.  Reversing the slides  
> often
> makes some difference just because  no horn is constructed absolutely
> perfectly and the little imperfections might  respond differently if  
> you place them
> somewhere else.
>
> On my horn, the  tubing is parallel throughout those slides - so the  
> bore
> doesn't  change.
>
> -William
>
>
> In a message dated 11/30/2009 3:01:10 P.M.  Eastern Standard Time,
> [email protected] writes:
>
> With  that 2 part tuning slide on the Schmid horn, you  open up a  
> gap in
> the
> bore of the horn in a different place, depending on which  part of   
> the
> slide you pull.  That's why the response is  different.   If those  
> slides
> will
> reverse, you might try  that too and you'll probably get a   
> difference in
> response that way  as well.  I'm sure somebody on the list  could  
> come up
> with the
> number of possible permutations there would be.   Actually,  do you  
> have to
> pull it pretty far to get it down to A=440?  It   might be  
> interesting to
> put
> some spacers inside to fill up some of  that  gap.  The sound and  
> response
> can get a little weird if the  tuning slide  is pulled a long way.   
> More
> permutations  please!
>
> - Steve   Mumford
>
>
>
> _______________________________________________
> post:  [email protected]
> unsubscribe or set options at
> https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/valkhorn%40aol.com
>
> _______________________________________________
> post: [email protected]
> unsubscribe or set options at 
> https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/jasoncat%40aol.com
_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to