Yes, but that's only true as long as the tuning slide is pushed in all the way home. When you pull the slide out, you open up an area inside that now has the bore size of whatever the i.d. of your outer tuning slide tube is. On a normal horn like a Conn, that means instead of .468, you have a spot that's .500 for whatever distance you pulled the slide out. Same idea for your Schmid only in some kind of metric numbers. There's not only a certain length of larger bore size, but also a "speed bump" at either end of it where it goes back to the normal bore. All of that has some effect and the effect is different depending on where in the the horn that you place it, as others have described. You could do away with the "gap" if you decided how far you were going to pull the tuning slide and then insert a couple of pieces of inner tubing of just that length. Then you'd have an undisturbed bore but you couldn't change the tuning unless you also changed your little pieces of tubing. Not having the gap might not be as good anyway since hopefully the horn is designed to sound better with the slide pulled a bit. As I mentioned before though, having to pull the slide out extra far creates a long length of larger bore size and that usually isn't the best for having it play optimally. In that case it might help to insert some correctly sized tubing to fill in some of the gap so it responds more normally. Reversing the slides often makes some difference just because no horn is constructed absolutely perfectly and the little imperfections might respond differently if you place them somewhere else.
On my horn, the tubing is parallel throughout those slides - so the bore doesn't change. -William In a message dated 11/30/2009 3:01:10 P.M. Eastern Standard Time, [email protected] writes: With that 2 part tuning slide on the Schmid horn, you open up a gap in the bore of the horn in a different place, depending on which part of the slide you pull. That's why the response is different. If those slides will reverse, you might try that too and you'll probably get a difference in response that way as well. I'm sure somebody on the list could come up with the number of possible permutations there would be. Actually, do you have to pull it pretty far to get it down to A=440? It might be interesting to put some spacers inside to fill up some of that gap. The sound and response can get a little weird if the tuning slide is pulled a long way. More permutations please! - Steve Mumford _______________________________________________ post: [email protected] unsubscribe or set options at https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org
