If you play on the F-side up to the written g2 (top of staff), which is our e2 (first space from top) on the F-side, there would not be such a problem 1+2 switching to 2+3. (Mozart no.1 in D-major). One should also know that c#2 on the F-side comes best with 2, also d#2 , and d2 as open.
There is no necessity to switch to the Bb-horn from written g1 (third line from top), nor is there any necessity to switch back to the F-side when passing down below the same written g. It is the software not the hardware, which must be changed. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Am 01.12.2009 um 22:47 schrieb Steven Mumford: > > Well, how about if we pick the Mozart 1st Concerto in D in the 1st > movement? > > Hans schrieb: > When & where does this switch 1+2 to 2+3 take place ? d-db on the Bb-side or > g#-a on the F-side. But you could use 3 instead of 12. So this is no argument > at all. > > It might be problematic if using alternate fingerings, but this is disturb?ng > anyway. > > Switching from 13 to 23 would be disturbing anyway, but it is not necessary, > as the g (Bb-horn) can be replaced by the g on the F-side. > > The most common horn is a 4-valve-horn not a stick to F until g1 (2nd line > from below) & play up on thre Bb-side exclusively. It is a 4-valve horn & all > valves should be treated & used equally, so to use the proper valve or open > position to get all notes in the best pitch no matter you play in the uppre, > the central or the lower region. > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > Am 30.11.2009 um 21:33 schrieb Steven Mumford: > >> >> >> Everybody seems to have trouble with their 3rd finger. I don't think >> it's as much a problem of not being able to move it fast enough, but rather >> moving it at the exact right moment. Let's say you have to go from 1+2 to >> 2+3. #3 has to go down at the same speed and time as #1 comes up. >> Otherwise you hear a bloop in the sound. So stop playing and put the >> mouthpiece in your ear so you can hear the mechanical noise really well, >> then go back and forth slowly between those two fingerings. You'll probably >> hear ka-clunk, ka-clunk etc., but what you want to hear is just a single >> thunk. Then when you play it, the sound will be clean. This will save a >> lot of practice time. Do the same with other difficult combinations and your >> E horn playing will start to shape up. >> Theoretically the 3rd finger has some issues, but it's no problem >> moving it fast enough to play anything in the horn literature. Just pay >> attention to the timing and put in a few years of practice. You can avoid >> using it a lot of times, but there are those golden moments when you have no >> choice, so it pays to be able to do it fast and clean. Use a different >> fingering for musical reasons, not because you can't do it the other way. >> >> - Steve Mumford > > _______________________________________________ > post: [email protected] > unsubscribe or set options at > https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/hpizka%40me.com _______________________________________________ post: [email protected] unsubscribe or set options at https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org
