I did it, but still unbareabely slow (like waiting for the test page for more than one minute :(
For the sake of being sure, here is the new hp-check output (part about printer drivers for the printer) HP_LaserJet_3390 ---------------- Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP70403 Installed in HPLIP? Yes PPD: /etc/cups/ppd/HP_LaserJet_3390.ppd PPD Description: HP LaserJet 3390 Postscript (recommended) Printer status: printer HP_LaserJet_3390 now printing HP_LaserJet_3390-108. enabled since Wed 14 Feb 2007 08:40:22 PM CET Thanks, Boris On Wed, 2007-02-14 at 09:47 -0800, Aaron wrote: > Can you try deleting the printer, and running hp-setup again and > selecting the postscript ppd? > A > > On 2/14/07, Boris Dušek <[EMAIL PROTECTED]> wrote: > On Wed, 2007-02-14 at 09:10 -0800, Aaron wrote: > > Can you run hp-check and post the output? > > > > I've tested with a LaserJet 3050 on Ubuntu Edgy and there is > not a > > speed problem. It could be if the print is using an > incorrect PPD > > file. > > > > Aaron > > > > Thanks for answer Aaron, > > the default printer is the one with underscores in the name, > here is > output of hp-check: > > > HP Linux Imaging and Printing System (ver. 1.7.1 ) > Dependency/Version Check Utility ver. 5.2 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux boris-laptop 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 > UTC 2006 > i686 GNU/Linux > > Detected distro (/etc/issue): > ubuntu 6.10 > > Detected distro (lsb_release): > Ubuntu 6.10 (edgy) > > Currently installed HPLIP version... > HPLIP 1.7.1 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.7.1 > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > doc=/usr/share/doc/hplip-1.7.1 > > # Following values are determined at configure time and cannot > be > changed. > [configure] > network-build=1 > pp-build=0 > gui-build=1 > scanner-build=1 > fax-build=1 > installinitd=/usr/lib/lsb/install_initd > chkconfig= > internal-tag=1.7.1.5 > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.4.4 installed > > Checking PyQt version... > OK, version 3.16 installed. > > Checking SIP version... > OK, Version 4.4.5 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic > library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ > Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF > language > interpreter and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain > groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development > files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing > System > development files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel > module.... > error: Not found! > This is an OPTIONAL dependency. Some HPLIP functionality may > not > function properly. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking > library > development files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python > programming > language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for > SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > OK, found. > > Checking for dependency Python 2.3 or greater - Required for > fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > HP_LaserJet_3390 > ---------------- > Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP70403 > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/HP_LaserJet_3390.ppd > PPD Description: HP LaserJet 3390 Foomatic/hpijs > Printer status: printer HP_LaserJet_3390 is idle. enabled > since Wed 14 > Feb 2007 01:52:01 PM CET > > > HP_LaserJet_3390_fax > -------------------- > Device URI: hpfax:/usb/HP_LaserJet_3390?serial=00CNMJP70403 > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/HP_LaserJet_3390_fax.ppd > PPD Description: HP Fax > Printer status: printer HP_LaserJet_3390_fax is idle. enabled > since Wed > 07 Feb 2007 01:15:26 PM CET > > > LaserJet-3390 > ------------- > Device URI: hp:/usb/HP_LaserJet_3390?serial=00CNMJP70403 > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/LaserJet-3390.ppd > PPD Description: HP LaserJet 3390 Foomatic/hpijs > Printer status: printer LaserJet-3390 is idle. enabled since > Wed 14 Feb > 2007 10:52:25 AM CET > > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in /etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > device `hpaio:/usb/HP_LaserJet_3390?serial=00CNMJP70403' is a > Hewlett-Packard HP_LaserJet_3390 all-in-one > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > 1 errors were detected. > Please refer to the installation instructions at: > http://hplip.sourceforge.net/install/index.html > > > > > > > -- > I don't care, I'm still free. You can't take the sky from me. - > "Firefly" > - > Ubuntu User: #11105 > Ubuntu Linux http://ubuntulinux.org ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
