Aaron,
How would I find that out that the mobo supports the correct protocols?
I ended up having the user send the printer back (laserjet 3055) and I sent him
over a different model (laserjet 3380).
I don 't want to run into the same issue.
Thanks
Derek Agar
IT Director
Mcleod Express
217-706-5016
[EMAIL PROTECTED]
----- Original Message -----
From: "Aaron" <[EMAIL PROTECTED]>
To: "Derek Agar" <[EMAIL PROTECTED]>
Cc: hplip-help@lists.sourceforge.net
Sent: Monday, April 16, 2007 1:02:34 PM (GMT-0600) America/Chicago
Subject: Re: [Hplip-help] invalid Dot4CreditRequest from peripheral
Derek,
What is the make/model of your motherboard? Is it possible for you to try
printing on another linux system? It's possible that your motherboard usb ports
may not support the correct protocols.
Aaron
On 4/11/07, Derek Agar < [EMAIL PROTECTED] > wrote:
I deleted the queues, restarted cups and hpijs, then did the hp-setup.
Now I am back to the original errors:
[EMAIL PROTECTED] ~]# tail -f /var/log/messages
Apr 11 14:55:58 localhost hpiod: unexpected DOT4CreditRequest: cmd=4, hid=1,
pid=1, maxcredit=8: io/hpiod/dot4.cpp 144
Apr 11 14:55:58 localhost last message repeated 4 times
Apr 11 14:55:58 localhost hpiod: no channel for sockid=2: io/hpiod/dot4.cpp 52
Apr 11 14:56:25 localhost hpijs: WARNING: printmode mismatch with pen, tray,
etc.
Apr 11 14:57:13 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 14:57:13 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 14:57:14 localhost python: hp-testpage[23895]: note: If an error
occured, or the test page failed to print, refer to the HPLIP website
Apr 11 14:57:14 localhost python: hp-testpage[23895]: note: at:
http://hplip.sourceforge.net for troubleshooting and support.
Apr 11 14:58:29 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 14:58:29 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 14:59:46 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 14:59:46 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 15:01:02 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 15:01:02 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 15:02:18 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 15:02:18 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 15:03:34 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 11 15:03:34 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Derek Agar
IT Director
Mcleod Express
217-706-5016
[EMAIL PROTECTED]
----- Original Message -----
From: "Aaron" < [EMAIL PROTECTED] >
To: "Derek Agar" < [EMAIL PROTECTED] >
Cc: hplip-help@lists.sourceforge.net
Sent: Wednesday, April 11, 2007 2:40:17 PM (GMT-0600) America/Chicago
Subject: Re: [Hplip-help] invalid Dot4CreditRequest from peripheral
Just for the heck of it can you try removing and reinstalling the printer?
ie delete the printer queue and set it up again using hp-setup.
A
On 4/11/07, Derek Agar < [EMAIL PROTECTED] > wrote:
Aaron,
I had the end user switch cables and put it in a different port. (It is at a
remote location)
Now I am getting this error when running tail -f /var/log/messages:
...
Apr 11 14:33:22 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
Apr 11 14:33:52 localhost hpiod: error submitting URB: No such device
io/hpiod/usbext.c 48
Apr 11 14:33:52 localhost hpiod: unable to write Dot4CreditRequest: No such
device io/hpiod/dot4.cpp 738
Apr 11 14:33:52 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 932
Apr 11 14:33:52 localhost hpiod: invalid Device::DeviceID: No such device
hp:/usb/HP_LaserJet_3055?serial=00CNBJ020495 io/hpiod/device.cpp 771
Apr 11 14:33:52 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
...
Of course the Office Jet device still works fine. Is the printer bad?
Derek Agar
IT Director
Mcleod Express
217-706-5016
[EMAIL PROTECTED]
----- Original Message -----
From: "Aaron" < [EMAIL PROTECTED] >
To: "Derek Agar" < [EMAIL PROTECTED] >
Cc: hplip-help@lists.sourceforge.net
Sent: Tuesday, April 10, 2007 2:29:08 PM (GMT-0600) America/Chicago
Subject: Re: [Hplip-help] invalid Dot4CreditRequest from peripheral
Have you tried a different USB cable?
also if possible try using a usb 1.1 hub and/or changing the speed of the
motherboard ports to 1.1.
And post the results.
A
On 4/10/07, Derek Agar < [EMAIL PROTECTED] > wrote:
The printer is plugged directly into the comptuer. No USB hubs.
Derek Agar
----- Original Message -----
Subject: Re: [Hplip-help] invalid Dot4CreditRequest from peripheral
Is the LJ3055 plugged directly into the printer or are you using a usb hub?
A
On 4/10/07, Derek Agar < [EMAIL PROTECTED] > wrote:
Hi,
I am trying to fix a problem with a HP LaserJet 3055 (MFP). I have Fedora Core
5 installed, the latest version of cups for fc5 and hplip version of 1.7.3. The
printer is very flaky about working and not working. I have tried to restart
the computer and usually stuff starts printing out.
Anyway, after issueing the command
tail -f /var/log/messages
I recieve these errors:
...
Apr 10 14:09:26 localhost hpiod: invalid Dot4CreditRequest from peripheral:
io/hpiod/dot4.cpp 939
Apr 10 14:09:26 localhost HP_LaserJet_3055?serial=00CNBJ020495: ERROR: check
device; will retry in 30 seconds...
...
This is repeated indefinately.
I am having the user use a HP OfficeJet 6100 (which works fine) until the issue
is resolved.
Any ideas?
Thanks
Derek Agar
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
