On Tue, 19 Jun 2007, Aaron wrote:
Could you run hp-check and post the output?
Aaron,
It's attached. Interesting that I could not redirect the output to a file,
but had to cut and paste from the virtual console.
A couple of the errors don't make sense to me. I always thought that
Slackware was LSB-compliant, so why isn't that detected? And, I compiled
libnetsnmp from source, so the 'devel' headers should be available. As a
matter of fact, /opt/net-snmp-5.4/include/ contains several header files.
I removed the ESP PrintPro drivers (using 'hp-remove'), and installed the
2500C using hp-setup. So, everthing is rather FUBAR. How do you recommend
that I proceed to fix all the problems?
Thanks,
Rich
--
Richard B. Shepard, Ph.D. | The Environmental Permitting
Applied Ecosystem Services, Inc. | Accelerator(TM)
<http://www.appl-ecosys.com> Voice: 503-667-4517 Fax: 503-667-8863
HP Linux Imaging and Printing System (ver. 1.7.4a)
Dependency/Version Check Utility ver. 5.3
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux salmo 2.6.19.2 #1 Thu Mar 1 12:44:29 PST 2007 i686 athlon-4 i386 GNU/Linux
Detected distro (/etc/issue):
unknown 0.0
Detected distro (lsb_release):
error: lsb_release not found.
Currently installed HPLIP version...
HPLIP 1.7.4a currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf
[hpiod]
# port=0 (dynamic IP port)
port=2208
[hpssd]
# port=0 (dynamic IP port)
port=2207
[hplip]
version=1.7.4a
jdprobe=0
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-1.7.4a
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=1
gui-build=1
scanner-build=0
fax-build=0
cups11-build=1
installinitd=
chkconfig=
internal-tag=1.7.4.13
HPLIP running?
Yes, HPLIP is running (OK).
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.4.3 installed
Checking PyQt version...
OK, version 3.14 installed.
Checking SIP version...
OK, Version 4.2.1 installed
----------------
| DEPENDENCIES |
----------------
Checking for dependency libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency SANE - Scanning library...
OK, found.
Checking for dependency GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency libjpeg - JPEG library...
OK, found.
Checking for dependency libpthread - POSIX threads library...
OK, found.
Checking for dependency make - GNU make utility to maintain groups of
programs...
OK, found.
Checking for dependency python-devel - Python development files...
OK, found.
Checking for dependency Reportlab - PDF library for Python...
OK, found.
Checking for dependency PyQt - Qt interface for Python...
OK, found.
Checking for dependency cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency ppdev - Parallel port support kernel module....
error: Not found!
This is an OPTIONAL dependency. Some HPLIP functionality may not function
properly.
Checking for dependency libusb - USB library...
OK, found.
Checking for dependency scanimage - Shell scanning program...
OK, found.
Checking for dependency libnetsnmp-devel - SNMP networking library development
files...
error: Not found!
error: This is a REQUIRED dependency. Please make sure that this dependency is
installed before installing or running HPLIP.
Checking for dependency Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency LSB - Linux Standard Base support...
error: Not found!
error: This is a REQUIRED dependency. Please make sure that this dependency is
installed before installing or running HPLIP.
Checking for dependency xsane - Graphical scanner frontend for SANE...
OK, found.
Checking for dependency cups - Common Unix Printing System...
OK, found.
Checking for dependency Python 2.3 or greater - Required for fax
functionality...
OK, found.
----------------------
| INSTALLED PRINTERS |
----------------------
colorp
------
Device URI: socket://colorp:9100
Installed in HPLIP? No
PPD: /etc/cups/ppd/colorp.ppd
PPD Description: HP 2500C Series, ESP Print Pro v4.4
Printer status: printer colorp disabled since Jan 01 00:00 -
Print file sent, waiting for printer to finish...
error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS
backend to function in HPLIP. (You can still print to this printer using
another backend and HPIJS.)
laser5
------
Device URI: socket://lj5:9100
Installed in HPLIP? No
PPD: /etc/cups/ppd/laser5.ppd
PPD Description: HP LaserJet 5, ESP Print Pro v4.4
Printer status: printer laser5 is idle. enabled since Jan 01 00:00
error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS
backend to function in HPLIP. (You can still print to this printer using
another backend and HPIJS.)
laser5_duplex
-------------
Device URI: socket://lj5:9100/
Installed in HPLIP? No
PPD: /etc/cups/ppd/laser5_duplex.ppd
PPD Description: HP LaserJet 5, ESP Print Pro v4.4
Printer status: printer laser5_duplex is idle. enabled since Jan 01 00:00
Print file sent, waiting for printer to finish...
error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS
backend to function in HPLIP. (You can still print to this printer using
another backend and HPIJS.)
laser5_single
-------------
Device URI: socket://lj5:9100
Installed in HPLIP? No
PPD: /etc/cups/ppd/laser5_single.ppd
PPD Description: HP LaserJet 5, ESP Print Pro v4.4
Printer status: printer laser5_single is idle. enabled since Jan 01 00:00
error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS
backend to function in HPLIP. (You can still print to this printer using
another backend and HPIJS.)
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' not properly setup (needs to be added to
/etc/sane.d/dll.conf).
Checking output of 'scanimage -L'...
device `v4l:/dev/video0' is a Noname Logitech QuickCam Communicate S virtual
device
device `hp:libusb:001:007' is a Hewlett-Packard ScanJet 5200C flatbed scanner
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
8 errors were detected.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
