Tom, Allan,
I'm getting the following trying to test your suggestions:
INSTALL UNIT(1091) VFY(NW1091) SETMODE(3380)
I would say you need to reconfigure the volume in the HDS 9990V as a 3380
first, then initialize it.
---------------------------------------------------------------------------------
ICK00700I DEVICE INFORMATION FOR 1091 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 3390
STORAGE CONTROLLER = 2105
STORAGE CONTROL DESCRIPTOR = E8
DEVICE DESCRIPTOR = 0A
ADDITIONAL DEVICE INFORMATION = 4A000035
TRKS/CYL = 15, # PRIMARY CYLS = 3339
ICK04000I DEVICE IS IN SIMPLEX STATE
ICK00091I 1091 NED=002105. .HTC.65.000000045342
ICK03091I EXISTING VOLUME SERIAL READ = NW1091
ICK31054I DEVICE NOT SUPPORTED FOR THE SPECIFIED FUNCTION
ICK30003I FUNCTION TERMINATED. CONDITION CODE IS 12
11:12:57 09/20/11
Am I missing something or is this a no-go given my hardware?
The address 1091 is currently a 3390 mod-3 on a HDS 9990V marketed by
Oracle/Sun/STK.
Thanks,
Dave O'Brien
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
