The message text for ICK31054I DEVICE NOT SUPPORTED FOR THE SPECIFIED FUNCTION
Will refer you to "1.1.4 Devices supported by ICKDSF" Which indicates in table 12 that the INSTALL command is not supported on CU type 2105 You might try INIT UNIT(1091) VFY(NW1091) ......DEVTYPE(3380)...... Not sure if this will work, but it's worth a try After that I would go to IBM and/or Oracle... HTH, <snip> I'm getting the following trying to test your suggestions: INSTALL UNIT(1091) VFY(NW1091) SETMODE(3380) ICK00700I DEVICE INFORMATION FOR 1091 IS CURRENTLY AS FOLLOWS: PHYSICAL DEVICE = 3390 STORAGE CONTROLLER = 2105 STORAGE CONTROL DESCRIPTOR = E8 DEVICE DESCRIPTOR = 0A ADDITIONAL DEVICE INFORMATION = 4A000035 TRKS/CYL = 15, # PRIMARY CYLS = 3339 ICK04000I DEVICE IS IN SIMPLEX STATE ICK00091I 1091 NED=002105. .HTC.65.000000045342 ICK03091I EXISTING VOLUME SERIAL READ = NW1091 ICK31054I DEVICE NOT SUPPORTED FOR THE SPECIFIED FUNCTION ICK30003I FUNCTION TERMINATED. CONDITION CODE IS 12 11:12:57 09/20/11 </snip> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html