Thanks all of you. I will try to check the Netview library for APF authorization.
also I will post this problem on Netview group. Thanks again. On Wed, Nov 23, 2011 at 5:56 PM, Chris Mason <chrisma...@belgacom.net>wrote: > Saurabh > > > Please help me to resolve this issue > > I tend not to deal with "issues", but rather more with "problems" and, > this being a case of something you apparently expected to work but which > clearly didn't (note the apostrophe), I would classify as a *problem*. > > The appropriate "forum" for dealing with problems related NetView is the > following: > > http://tech.groups.yahoo.com/group/NetView/ > > This is quite an active "forum" and I have seen NetView development folk > participating. > > That said, there is quite a lot you can do with the information you posted. > > - > > Although generally "Google is your friend", a good place to start can also > be the IBM message look-up facility: > > http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/index.html > > > IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED > > <quote> > > IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED > > Explanation: The initiator found that a program to be run did not satisfy > all the requirements needed to obtain all the special properties designated > by the program name. > > - If the program to be run is not a single step job or task, the system > nullifies the NODSI parameter. All other program properties remain in > effect. > > - If the program to be run is not a started task that runs only a single > step, the system nullifies the SYST parameter. All other program properties > remain in effect. > > - If a non-APF authorized JOBLIB or STEPLIB statement is present, the > system nullifies all Program Properties table (PPT) parameters. > > System Action: The system assigns problem program attributes in place of > the special properties. > > System Programmer Response: If no special properties are required, no > action is necessary. If special properties are required and a JOBLIB or > STEPLIB is in use, ensure that the JOBLIB or STEPLIB data sets are APF > authorized. Also ensure the special attributes 'started only' or '1-step > only' are satisfied for the required special properties. > > Source: Initiator/terminator > > </quote> > > > http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2M8C0/SPTGG188I > > Find the name of the program used in the NETVSSI procedure and check what > characteristics it has in the IEFSDPPT module as described in the section > "76.7 Program properties table (PPT)" of the "z/OS MVS Initialization and > Tuning Reference" manual. > > http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2e2c0/76.7 > > Check whether there is an "override" provided by a PPT statement in the > active SCHEDxx member and, if so, what that specifies rather than the code > in the IEFSDPPT module. > > If all this is a bit complex, post the NETVSSI procedure and any relevant > SCHEDxx member from your SYS1.PARMLIB. > > - > > > 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPP NOT FOUND > > This one should be simplicity itself! > > Find out which partitioned data set (PDS - "library") containing load > modules contains the CNMPP module and then why that PDS is *not* in the > STEPLIB concatenation of the NetView program in the NETVIEW procedure. > > - > > And please tell us how you got on! > > Chris Mason > > On Wed, 23 Nov 2011 15:35:56 +0530, saurabh khandelwal < > sourabhkhandelwal...@gmail.com> wrote: > > >Hello, > > I am trying to bring up Netveiw address spaces. but I proc is > >abended with 0C4. I tried isolating using help of google but it didnt > >helped me much. > > > >1) S NETVSSI > > > > STMT NO. MESSAGE > > 2 IEFC001I PROCEDURE NETVSSI WAS EXPANDED USING SYSTEM LIBRARY > >TIVOLI.PROCLIB > > IEF695I START NETVSSI WITH JOBNAME NETVSSI IS ASSIGNED TO USER SYSSTC > , > >GROUP SYSPROC > > IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED > > IEA995I SYMPTOM DUMP OUTPUT > > SYSTEM COMPLETION CODE=0C4 REASON CODE=00000011 > > TIME=07.51.49 SEQ=00072 CPU=0000 ASID=0066 > > PSW AT TIME OF ERROR 078D1000 00008746 ILC 4 INTC 11 > > ACTIVE LOAD MODULE ADDRESS=000078D8 OFFSET=00000E6E > > NAME=CNMINIT > > DATA AT PSW 00008740 - 001058E0 908C5810 E1DC5910 > > > > > >2) S NETVIEW > > > >07.52.36 STC00667 ---- FRIDAY, 20 DEC 2013 ---- > > 07.52.36 STC00667 IEF695I START NETVIEW WITH JOBNAME NETVIEW IS > >ASSIGNED TO USER SYSSTC , GROUP SYSPROC > > 07.52.36 STC00667 $HASP373 NETVIEW STARTED > > 07.52.36 STC00667 IEF403I NETVIEW - STARTED - TIME=07.52.36 > > 07.52.37 STC00667 - --TIMINGS > >(MINS.)-- ----PAGING COUNTS--- > > 07.52.37 STC00667 -JOBNAME STEPNAME PROCSTEP RC EXCP CPU SRB > >CLOCK SERV PG PAGE SWAP VIO SWAPS STEPNO > > 07.52.37 STC00667 -NETVIEW STEP1 00 652 .00 > >.00 .02 1633 0 0 0 0 0 1 > > 07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPP NOT FOUND > > 07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW > STEPNAME=NETVIEW > > 07.52.37 STC00667 IEA995I SYMPTOM DUMP OUTPUT 378 > > 378 SYSTEM COMPLETION CODE=806 REASON CODE=00000004 > > 378 TIME=07.52.37 SEQ=00074 CPU=0000 ASID=0066 > > 378 PSW AT TIME OF ERROR 070C1000 8128BBD0 ILC 2 > INTC > >0D > > 378 NO ACTIVE MODULE FOUND > > 378 NAME=UNKNOWN > > > > > >Please help me to resolve this issue > > > > > >Regards > >Saurabh > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > -- Thanks & Regards Saurabh Khandelwal ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
