Frank Chu wrote:
I'm trying to set up an instruction fetch SLIP TRAP and for the most
part it works. The problem I am running into is that the SLIP trap is
being triggered outside the range that I have specified.
The current incarnation of my SLIP looks like the following:
SLIP
set,if,disable,action=svcd,range=(176366EE,176366F2),id=fhc2,asid=36,end
Once the SLIP is issued I set up my test case, enable the SLIP and
fire my test. A dump is captured but it shows that the point where
the dump is captured is at location x'17636266', well before the range
I specified. I've tried specifying LPAMOD as well as LPAEP, all with
the same results.
The instruction that I am trapping is a 'SPKA 0' while the instruction
that is triggering the dump is an 'SVC 56'.
Any ideas as to why this is happening?
Use A=SYNCSVCD instead of A=SVCD. That should help.
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los Angeles, CA 90045
310-338-0400 x318
[EMAIL PROTECTED]
http://www.phoenixsoftware.com/
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html