The HP 4015 can have up to four optional trays , but if you only have three, then the one marked 3 on the outside is 2 and the one marked 4 is 3.
Barry -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Greg Shirey Sent: Wednesday, June 18, 2014 9:45 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: HP P4015tn paper tray selection I'm confused by your references to the manual paper feed and tray 2. You said there are three paper sources, so if tray 3 and tray 4 are two of them, the third one is either the manual feed or tray 2 - or are they one and the same? Regards, Greg Shirey Ben E. Keith Company From: Rick Stetser Sent: Wednesday, June 18, 2014 9:45 AM To: IBM Mainframe Discussion List I have a developer who's trying to print on an HP Laserjet P4015tn printer that has three paper sources. The first one, I think, is the manual paper feed and the other two are actual trays that hold paper and they’re marked 3 and 4 on the outside of the tray. The developer is trying to get the forms from the bottom tray (marked 4) to print but without success. The document data is AFP which is transformed to PCL via IP Printway (hereafter called Infoprint). We're using a FORMDEF that looks like this: SETUNITS 1 IN 1 IN; FORMDEF WHDOC OFFSET .158 .197 JOG YES REPLACE YES; COPYGROUP LODRWRPT BIN 2 OFFSET .158 .197; COPYGROUP UPDRWRSS BIN 3 OFFSET .158 .197; COPYGROUP DRWTHREE BIN 4 OFFSET .158 .197; Currently we print this document (using a slightly different FORMDEF) so that one page comes out on plain paper from tray 3 and the other paper has special paper stock and prints from tray 2. The change that’s being tested is to have an additional page print on plain stock from tray 4. What’s actually happening is the additional page is printing from tray 2. If the FORMDEF COPYGROUP DRWTHREE, is changed to BIN 2, the stock draws from tray 3. We tried playing around with the AOP_TRAYID settings changing the fourth position to all of the values from 1 to 5. In many cases that caused the printer to draw from the manual paper feed. If anyone has any suggestions on this I would sure appreciate it. We're z/OS 1.13. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN