Thanks everyone so far. You are a good group to work with. The answers will be shared with our TCP guy and I will carry on from here.
H -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Cieri, Anthony Sent: Tuesday, November 1, 2016 15:07 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with email Hilary, If you are just getting started with SMTP on the mainframe, you might want to consider the "newer" mail server called CSSMTP. It definitely has some additional functionality and it may also address some security concerns. Also, SMTP won't be supported beyond z/OS V2.2, so depending upon which release of z/OS you are running, you will eventually have to "upgrade" to CSSMTP anyway!! HTH Tony ________________________________________ From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Allan Staller [allan.stal...@hcl.com] Sent: Tuesday, November 01, 2016 8:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Help with email This is normal behavior for the described process. The IEBGENER step ends successfully (RC=0) and the output is placed in spool. At some later time, SMTP retrieves the data from the spool and attempts to send it to the appropriate destination. Most shops I have encountered, configure SMTP to send the mail to the "corporate" email server for distribution. HTH, Another alternative might be to use the SMTPNOTE REXX -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Hilary Hurwitz Sent: Tuesday, November 1, 2016 7:41 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Help with email Until now our site's use of email from the mainframe has been very limited, due to security concerns. However I am not to be allowed to use email in a limited way. The JCL I was told to use was //S16DBNA1 JOB (XO,005,0099,1,0),NAT,NOTIFY=&SYSUID, // TIME=(001,39),CLASS=O, // REGION=5M /*JOBPARM SYSAFF=BL1A //IEBGENER EXEC PGM=IEBGENER //SYSIN DD DUMMY //SYSUT1 DD * HELO N1 MAIL FROM:<HILIRI_HORVITZE@SNIFIM.BLROOT<mailto:HILIRI_HORVITZE@SNIFIM.BLROOT>> RCPT TO:<HILARY_H@SNIFIM.BLROOT<mailto:HILARY_H@SNIFIM.BLROOT>> DATA SUBJECT:SUBJECT LINE HALLO . THIS IS EMAIL FROM THE MAINFRAME. BYE . . QUIT /* //SYSUT2 DD SYSOUT=(B,SMTP) //SYSOUT DD SYSOUT=V //SYSPRINT DD SYSOUT=V But I have a few problems with this. If the email fails the job ends with a 0, and until a rejection email arrives back to me, I have no idea of problems. I have a feeling we have a hole in the knowledge of our tcp people here. Is this the way to work ? Surely the job should be able to know if the email was sent? I came from VSE environment where we were given responses. Is this the best way to send emails ? What am I missing ? Hilary PS the jcl above works with no problems, so don't try and debug it please ;) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ---------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN