SMF type 30 records have a section in them on DASD.  Recorded by unit number in 
the EXCP section.

Chris Blaicher
Technical Architect
Mainframe Development
Syncsort Incorporated
50 Tice Boulevard, Woodcliff Lake, NJ 07677
P: 201-930-8234  |  M: 512-627-3803
E: cblaic...@syncsort.com

www.syncsort.com





-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Campbell Jay
Sent: Thursday, November 3, 2016 8:46 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMF RECORD TYPE : HELP

SPOOL shouldn't matter.
Must have had RMFGAT running at the time.
No idea how long your RMF repository holds data.

Jay Campbell
MSSD – IZSSB – IOSSS


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu] On Behalf 
Of John Dawes
Sent: Thursday, November 03, 2016 8:40 AM
To: IBM-MAIN@listserv.ua.edu
Subject: Re: SMF RECORD TYPE : HELP

 I was able to access the panel however the job is no longer in the spool 
because it has been sent to $AVRS.

--------------------------------------------
On Thu, 3/11/16, Campbell Jay <james.l.campb...@irs.gov> wrote:

 Subject: Re: SMF RECORD TYPE : HELP
 To: IBM-MAIN@LISTSERV.UA.EDU
 Received: Thursday, 3 November, 2016, 8:32 AM

 How about  RMF
 panels   3 - 2 - 5 ?
 Put in
 jobname - then set time for when job was running

 Jay Campbell
 MSSD – IZSSB – IOSSS

 -----Original Message-----
 From: IBM Mainframe Discussion List [mailto:IBM-MAIN@listserv.ua.edu]  On 
Behalf Of John Dawes
 Sent: Thursday,
 November 03, 2016 8:23 AM
 To: IBM-MAIN@listserv.ua.edu
 Subject: Re: SMF RECORD TYPE : HELP

 Yes, I tried that.  However,
 when I issued the command it was too late (3 minutes after  the job abend).  
This is why I thought by  reading SMF  records would have some info on the 
volume.


 --------------------------------------------
 On Thu, 3/11/16, Blake, Daniel J [CTR] 
<000000f1be92566d-dmarc-requ...@listserv.ua.edu>
 wrote:

  Subject: Re: SMF
 RECORD TYPE : HELP
  To: IBM-MAIN@LISTSERV.UA.EDU
  Received: Thursday, 3 November, 2016, 7:56  AM

  Have you tried the
 alloc
  command from the console or SDSF?

  D U,,ALLOC,devaddr,1

  Thank You



  ;-D an





 -----Original Message-----
  From: IBM
 Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]  On Behalf Of John 
Dawes
  Sent: Thursday,
  November 03, 2016 7:53 AM
  To:
 IBM-MAIN@LISTSERV.UA.EDU
  Subject: SMF RECORD TYPE : HELP

  G'Day,


  Could someone suggest how I could obtain  information about a certain DASD 
volume?  I am trying to  trouble shoot a problem of a job failure when 
attempting  to  copy a volume using the following parms.

  COPY INDYNAM(SYS012)
 OUTDYNAM(BCD012)
  CANCELERROR      -

     PURGE ALLEXCP
 ALLDATA(*) OPT(4) ADMIN FCNOCOPY
  -

  I get the following
  message:


 ADR306E
  (043)-SBRTN(01), UNABLE TO COPY THE
 VOLUME BECAUSE OUTPUT  VOLUME BCD012  IS IN USE. TASK IS  TERMINATED

  I am trying to
 find out what
  resource was using the volume
 at that time.  I thought that  SMF would be a solution  however I don't see a 
SMF record  type for DASD.

  Any

 suggestions would be very welcome.

  Thanks.


 ----------------------------------------------------------------------
  For IBM-MAIN subscribe / signoff / archive  access instructions, send email 
to lists...@listserv.ua.edu  with the message: INFO IBM-MAIN



 ----------------------------------------------------------------------
  For IBM-MAIN subscribe / signoff / archive  access instructions,  send email 
to lists...@listserv.ua.edu  with the message: INFO IBM-MAIN


 ----------------------------------------------------------------------
 For IBM-MAIN subscribe / signoff / archive  access instructions, send email to 
lists...@listserv.ua.edu  with the message: INFO IBM-MAIN

 ----------------------------------------------------------------------
 For IBM-MAIN subscribe / signoff / archive  access instructions,  send email 
to lists...@listserv.ua.edu  with the message: INFO IBM-MAIN


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

________________________________



ATTENTION: -----

The information contained in this message (including any files transmitted with 
this message) may contain proprietary, trade secret or other confidential 
and/or legally privileged information. Any pricing information contained in 
this message or in any files transmitted with this message is always 
confidential and cannot be shared with any third parties without prior written 
approval from Syncsort. This message is intended to be read only by the 
individual or entity to whom it is addressed or by their designee. If the 
reader of this message is not the intended recipient, you are on notice that 
any use, disclosure, copying or distribution of this message, in any form, is 
strictly prohibited. If you have received this message in error, please 
immediately notify the sender and/or Syncsort and destroy all copies of this 
message in your possession, custody or control.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to