Glad you have this solved, I've not dealt with switches in about 5 years, so it's good to know you have this solved and kutos to those who helped and great info for anyone who see's this issue in the future !
Carmen Vitullo ----- Original Message ----- From: "R.S." <r.skoru...@bremultibank.com.pl> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Thursday, August 23, 2018 10:42:45 AM Subject: Re: FICON "Invalid attachment failure" The problem is solved! First, I would like to help all the people who helped me on this forum and off-list. I appreciate it very much. Thank you gentlemen! For the record purposes the solution and full story: I had to set HIF (High Integrity Fabric) to YES. Note1, there is no such option in GUI (webtools), only CLI (configure - fabric parameters) Note2, it is relatively new option, it is available in FOS 7.4.2a, but not yet present in 7.2.1d Note3, HIF enables/disables support for FICON, despite all relevant parameters (PBR, DLS, IOD, IDID) are OK. Note4, HIF setting was automagically set to NO during FOS upgrade. Note5. All existing connections survived the (non-disruptive) upgrade because those settings are checked only during "handshaking" process and the machines were not POR-ed since the FOS upgrade. My recommendation: after any FOS change disable and re-enable some chpids attached to the switch. BTW: I wish I would have some button in webtools or command like "ficonsetall". -- Radoslaw Skorupka Lodz, Poland ====================================================================== Jeśli nie jesteś adresatem tej wiadomości: - powiadom nas o tym w mailu zwrotnym (dziękujemy!), - usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś na dysku). Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać karze. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237, NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 01.01.2018 r. wynosi 169.248.488 złotych. If you are not the addressee of this message: - let us know by replying to this e-mail (thank you!), - delete this message permanently (including all the copies which you have printed out or saved). This message may contain legally protected information, which may be used exclusively by the addressee.Please be reminded that anyone who disseminates (copies, distributes) this message or takes any similar action, violates the law and may be penalised. mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital City of Warsaw, 12th Commercial Division of the National Court Register, KRS 0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 169,248,488 as at 1 January 2018. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
