Yes, I reported this problem over a month ago. It also doesn't happen in a way I can reproduce but it does happen. I don't think there is a fix for it today but I am sure they are working on it.
Aria. On Wed, 3 May 2006 13:45:21 -0400 Horlick, Michael said: >Aria, > >I have opened an issue. I don't see any hits with Service Link. What I >have done so far with a PC emulated NON 3278 Model 2 device is: =20 > >1) IPLed the CMS 190 minidisk from 2nd level at 1st level and everything >works fine. >2) Accessed the 1st level system through an SNA network and then did a >DIAL to my 2nd level. This worked fine. > >For some strange reason only if I go through my TCP/IP stack first level >and then do the DIAL into 2nd level that I have this problem. I have no >problem dialing into a 2nd level zVM 3.1 system.=20 > >I remember once doing, I think, a CP TRACE command to trace the I/O's to >a device. Not sure on usage and how I could decipher the 3270 datastream >but will investigate. > >Thanks > >Mike=20 > =20 > >-----Original Message----- >From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On >Behalf Of Aria Bamdad >Sent: May 3, 2006 1:08 PM >To: IBMVM@LISTSERV.UARK.EDU >Subject: Re: Prog 754 on Graphic device 2nd level zVM 5.2 > >Mike, > >I this is a known problem for 5.2. Please call the support center. > >Aria. >On Tue, 2 May 2006 14:03:06 -0400 Horlick, Michael said: >>I just tried with PCOMM as well and am getting the same symptoms.=3D20 >> >>Using Extra I am creating a TN3270 session connecting to Port 2300 (I >>use Port 23 for CA-TPX) through my first level VM TCP/IP stack. I have >>no problems with first level. I have extended attributes, any model >>(Model 2,3,4,5) configuration. Never a problem. >> >>After getting our first level logo I clear the screen and DIAL into my >>zVM 5.2 system. Everything looks ok until I XEDIT a file. If I'm >defined >>as a model 4 I can browse any file no problem, I can FLIST ok, it just >>seems to be XEDIT.=3D20 >> >>Maybe it's time to open a call to IBM support center. >> >>Mike >> >>-----Original Message----- >>From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On >>Behalf Of Eric Schadow >>Sent: May 2, 2006 1:27 PM >>To: IBMVM@LISTSERV.UARK.EDU >>Subject: Re: Prog 754 on Graphic device 2nd level zVM 5.2 >> >>I dialed to z/VM 5.2 second level from z/vm 5.1 and xedit worked ok for >>me on Extra 6.5 SP2. >> >>How are you attaching to the first level system? >> >> >> >>At 01:18 PM 5/2/2006, you wrote: >>>Hello Eric, >>> >>>Thanks for your response. What's interesting is that it works fine for >>>zVM 3.1 but not for zVM 5.2. What could be different to account for >>>this? I went to the Attachmate site and could not find any hits for >>this >>>type of error.=3D3D20 >>> >>>Mike =3D3D20 >>> >>> >>>-----Original Message----- >>>From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] >On >>>Behalf Of Eric Schadow >>>Sent: May 2, 2006 1:04 PM >>>To: IBMVM@LISTSERV.UARK.EDU >>>Subject: Re: Prog 754 on Graphic device 2nd level zVM 5.2 >>> >>>Mike >>> >>>Extra has the same issues with VSE consoles. >>> >>>If you have a current support contract withe Attachmate I would >report >>>the issue to them. >>> >>> >>>eric >>> >>> >>> >>> >>>Eric Schadow >>>Mainframe Technical Support >>>www.davisvision.com=3D3D20 >>> >>> >>> >>>---------------------------------------------------------------------- >- >>- >>>The information contained in this communication is intended >>>only for the use of the recipient(s) named above. It may >>>contain information that is privileged or confidential, and >>>may be protected by State and/or Federal Regulations. If >>>the reader of this message is not the intended recipient, >>>you are hereby notified that any dissemination, >>>distribution, or copying of this communication, or any of >>>its contents, is strictly prohibited. If you have received >>>this communication in error, please return it to the sender >>>immediately and delete the original message and any copy >>>of it from your computer system. If you have any questions >>>concerning this message, please contact the sender. >>>---------------------------------------------------------------------- >- >>- >> >>Eric Schadow >>Mainframe Technical Support >>www.davisvision.com=3D20 >> >> >> >>----------------------------------------------------------------------- >- >>The information contained in this communication is intended >>only for the use of the recipient(s) named above. It may >>contain information that is privileged or confidential, and >>may be protected by State and/or Federal Regulations. If >>the reader of this message is not the intended recipient, >>you are hereby notified that any dissemination, >>distribution, or copying of this communication, or any of >>its contents, is strictly prohibited. If you have received >>this communication in error, please return it to the sender >>immediately and delete the original message and any copy >>of it from your computer system. If you have any questions >>concerning this message, please contact the sender. >>----------------------------------------------------------------------- >-
